 |
 |
PRICE:
Loaded on Truck, Our Warehouse, York, PA …… $5,950.00
Stock # 11176
Serial # 71368 New 1970s Model # 1310, Type: EIU
Shop # 1827/43
Diameter Ground with New Wheel: 8" Max.
Grinding Length Between Centers: 18" Max.
Height from Table Top to Centers: 4"
Adjustment of Table Included Angle: 20 Degrees
Adjustment of Table Included Angle Taper: Up to 4" Per Foot
Table Traverse Rates, Hydraulic Infinitely Variable: 3" to 144" Per Minute
Feed Range at Reversal of Table, Reduction in Diameter: .0002" to .0012"
Standard Grinding Wheel Size: 12" x 1-/2" x 5" Bore
Wheel Speeds: 1750 to 2300 RPM
Horsepower of Wheel Head Motor: 2
Cross Traverse of Wheel Head: 3/4" to 2"
Work Head Speeds: 30 to 100 RPM Via V-Belt Change and DC Motor
Work Head DC Motor is 220 Volts Only
Work Head Swivels: 15 Degrees Out & 90 Degrees In
Work Head Motor Horsepower: 1/3
EQUIPPED WITH:
ID Attachment Bolted to Rear of Wheel Head - it Swivels into Position
Quick Acting Tailstock Quill Lever
ID Spindle Speeds: 1750/2300 RPM via 2-Position V-Belt Pulley
Machine Work Light
Work Area Splash Guards
Electrics for 50/60 Hz with Multi Tap Transformer. for 190 to 440 Volts
Vernier Fine Feed Knob for X-Axis Table Traverse
(1) Adjustable Table Stop Dog
Grinding Wheel Guard
Center Live or Face Live Work Head
MS Collect Attachment for Work Head
(29) Assorted Size Collects
8" 4-Jaw Chuck, Flat Back with OD & ID Jaws
9-1/2" Face Plate
8" Diameter Face Plate
EQUIPPED WITH:
(15) Assorted Work Dead Centers
One Shot Central Lubrication System
(1) Wheel Hub
(1) Wheel Puller
Table Mounted Wheel Dresser with Diamond
(1) Adjustable Work Support
(1) 3-Point Steady Rest, 5/16" to 2-1/4" Capacity
Manual Work Head Tool Draw Bar
Work Head Test Alignment Rod
(2) Additional Internal Grinding Spindles
(9) Assorted ID Grinding Spindles
External Coolant Tank and Pump
Assorted ID Grinding Wheel Guards
Static Wheel Balancing Stand and Arbor
DIMENSIONS:
Machine: 66" L-R x 49" F-B x 69" High
Accessory Cabinet: 12" x 15" x 30" High
External Hydraulic System: 12" x 29" x 22" High
Coolant Tank Unit: 30" x 16" x 25" High
 | New & Used Machinery • Certified Appraisals Plant Liquidations & Auctions HILDEBRAND MACHINERY CO INC 2023 Black Bridge Road * York, PA * PH. 717-846-2600 * FAX 717-845-949 EMAIL: SALES@HILDEBRANDMACHINERY.COM WEB: WWW.HILDEBRANDMACHINERY.COM OR WWW.7178462600.COM All sales subject to our Terms & Conditions page |  |
|