View Our Inventory

3' x 9" CINCINNATI BICKFORD RADIAL DRILL



Description & Specifications

3' X 9" CINCINNATI BICKFORD RADIAL DRILL
PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $3,950.00

HMC Stock No. 17129
Machine Serial No. 1R1025
Machine Model No. 1R
New Date: 1939

(9) Spindle Speeds: 75 to 1500 RPM
(4) Feeds: 2, 4, 7 & 10 Thousandths per Revolution
Spindle Taper: #4 Morse
Quill Diameter: 2-5/8"
Quill Travel: 6-1/2"
Base Working Size: 30" x 36"
Distance Centerline of Spindle to Column: 14-1/4" Min. to 39-3/4" Max.
Distance Spindle Nose to Base: 25-1/2" Min. to 52-1/2" Max.

EQUIPPED WITH:
Manual Radial Clamping and Clamping of Head on Arm
Mono Level Power Arm Elevation Control
Hard Replaceable Way Strip on Arm
Hand & Lever Arm Control of Quill
Arm & Column Ways in Good Condition
Work Table Size 22" x 22" x 22-13/16" High with (3) T-Slots (no table face)
Work Table Rotates 360 Degrees and Tilts 90 Degrees
1/8" to 5/8" Cpaciy Jacobs Key Type Drill Chuck with Key
Designed For But NO Coolant Pump or Piping
NO Adjustable Quill Feed Depth Stop
3 HP Motor, Wired 3 Phase, 60 Hz, 208/230 Volts Only
Wired for 230 Volt Operation

Overall Machine Size: 85" L-R x 34-1/2" F-B x 80" High (to floor) x Approx. 5,000 Lbs.






TERMS AND CONDITIONS OF SALE

GUARANTEE: Unless sold AS IS, HMC will accept within 30 days from shipment any machinery and equipment sold with return privilege, freight prepaid, for refund of the purchase price if proven mechanically unsatisfactory; or repair at dealer's option. Buyer is responsible for all freight charges. This guarantee applies only to machines, which we own. The machine must be returned in the same condition that it left HMC's warehouse. HMC shall not be responsible for any damages done by truckers, riggers, or other parties. Machines damaged in shipping are not covered under the return privilege. HMC reserves the right to void the return privilege or charge a restocking fee if purchase is made without physical inspection by buyer or their representative.

TERMS: We accept cash, check, wire transfer, Visa or Master Card with order. All machines are quoted, Loaded on Truck Our Warehouse York, Pennsylvania, unless otherwise stated. All machines offered are subject to prior sale and prices quoted are exclusive of any government sales tax. Machinery descriptions are intended as a guide only and their accuracy is not guaranteed. Machines paid via credit card require a 3% transaction fee and are subject to a restocking charge if returned.

CONDITIONS: There are no warranties which extend beyond the description of the face hereof. Quotations are subject to change without notice. All agreements and/or contracts made by salesmen or representatives are subject to approval by Home Office - Hildebrand Machinery Co., Inc.

MACHINE SAFETY: It is the buyer's and user's responsibility to provide proper safety devices, training and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards.

INDEMNIFICATION: User agrees to indemnify and hold harmless Seller of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agents to follow instructions, warnings, or recommendations available from the original manufacturer, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970.


Return to previous page

All sales are subject to our TERMS & CONDITIONS