56" BULLARD DYNATROL VERTICAL BORING MILL
PRICE: Loaded on Truck, Our Warehouse, York, PA … $19,500.
HMC Stock No. 17166
Machine Serial No. 31302
Machine Model No. Dynatrol
New Date: 1965
Table Size: 56" 4-Jaw with (4) Hard Reversible Top Jaws
Maximum Swing Side Head Above Table: 62"
Maximum Swing Side Head Below Table: 66"
Maximum Height Under Turret: 52"
Rail Adjustment: 35"
Turret Head Swivel: 30 Degrees
Turret Head Travel Left of Center Line: 34-1/2"
Turret Head Travel Right of Centerline: 31"
Turret Head Travel Vertical: 26"
Left Head, Some Ram Head Carriage and Controls are There BUT
Many Parts are MISSING
Left Head Slide Ram is MISSINGSide Head Travel Vertical: 38-3/4"
Side Head Travel In & Out: 23-3/4"
Table Height: 37"
Table Speed: 7 to 250 RPM
Feeds: .001 to .250 IPM
Rapid Traverse: 120 IPM
English Threads TPI: 2 to 32
Metric Threads MM: 1 to 7
English Drum Scoring TPI: ¼ to 1-3/4
Metric Drum Scoring MM: 8 to 44
TDA Attachment for Angle Turning, English and Metric Threading and Drum Scoring
(27) Assorted Change Gears for TDA
Rail and Side Head Feed Features: Rapid – Creep – Neutral - Feed
Hardened Chrome Ways on Rail and Vertical For Side Head
5-Position Rail Turret Head with Manual Indexing
4-Position Turret Type Side Head Tool Holder with Manual Indexing
Pendant Control for Table Speeds and Clutch Engagement Only
Flush Floor Design
NO Chuck Wrench
NO Chip / Coolant Pan as seen in the pictures.
Motor and Belt Guarding
(3) 3 Sided Tool Holders, (1) boring Bar and (1) Bull Nose Center
¾ HP Coolant Pump Motor
75 HP Main Motor, Wired for 3 Phase, 60 Hz, 220 / 440 Volts
Motor Mount Frame Has Belt Tensioning Adjustment and is Bolted To The Chip Pan
Overall Dimensions 144" L-R x 119" F-B (motor removed) x 143-5/16" High x 71,600 Lbs. (machine only no motor or pan)
Chip Pan with Motor Attached 120" x 156" x 104" High with assembled motor and electrical conduit