40" DAKE/JOHNSON VERTICAL BAND SAW
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $2,500.00 AS IS
HMC Stock No. 18211
Machine Serial No. 186389
Machine Model No. VH-40
New Date: 1987
Test Run Report:
Wired for 220 Volt 3 Phase. Vary drive only goes to 100 sfpm. Used all of adjustment. Blade welder does not work. The table feed works. The lower vary drive pulley is way out of alignment, it pushes compressor belt off the pulley.
Throat: 41"
Maximum Work Height: 12-1/2"
Work Table: 26-3/8" x 26-3/8" with (4) Tee Slots
Auxiliary Table: 15-1/2" x 21-1/2"
Hydraulic Table Travel: 10" with Variable Feed Pressure
Table Tilts: 10° Left & 30° Right
Blade Width: 1/8" to 3/4"
Blade Length: 189" Using All (3) Blade Drive Wheels
& 138" Using (2) Blade Drive Wheels
Blade Drive Wheels: 16-1/2" Diameter
Variable Blade Speeds via 2-Speed Transmission: 50 to 500 FPM
& 500 to 5000 FPM
Blade Drive Motor: 2.2 HP
Hydraulic Pump Motor: 1/3 HP
Blade Welder & Grinder
Misc. Blade Guides, Hold Down Clamps & Circle Cutting Attachment
Blade Tension Indicator
Adjustable Rip Fence
Overall Machine Size: 79" L-R x 49" F-B x 79" H
Machine Weight: 2,400 Lbs.
