View Our Inventory


Description & Specifications

PRICE: Loaded on Truck, Our Warehouse, York, PA …… $24,500.00

HMC Stock No. 18329-P
Machine Serial No. 06721-50-7060
Machine Model No. 72-5-22
New Date: 2006

There is a 72" diameter work chamber with 5 abrasive resistant tables rotating independently thru the blast chamber. Abrasive is fed into the direct drive blast wheel. The blast wheel revolves at 3600 RPM throwing the abrasive at the part to be blasted at high velocity. The abrasive passes thru the screening in the floor of the cabinet where it is conveyed via auger to the shot elevator. The elevator transports the abrasive to the separator. The separator removes contaminants from the abrasive and deposits the clean abrasive into the abrasive storage hopper. The hopper has the capacity to store enough of the clean abrasive to maintain an even flow to the blast wheel. The dust and contaminants are drawn out of the separator and into the dust collector system for disposal.

(1) Blast Wheel: 15 HP, 12" Diameter, Direct Drive
Distance from Main Table to Blast Wheel Opening: 31"
11-1/2" Diameter of the Base of the 5 Rotating Tables
Presently there are Fixtures Mounted to these Tables that are 22" Diameter x 13-1/4" High
Replaceable Manganese Wear Plates in Blast Area
Open Load and Unload Station in the Front and Rear Blast Station with Door
Operator Control Panel with Allen Bradley Power Flex 70 PLCs

Disa/Goff Dust Collector, Serial No. 2166941-1, Model No. DF02-4
5 HP, Wired 3 Phase, 60 Cycle, 208-460 Volts
(4) Cartridge Type Filters with Air Pulse Cleaning and Magnehelic Gauge
10" Diameter Air Intake Duct
Discharge Hopper on the Bottom with Lid to Fit a 55 Gallon Drum
7" Diameter Discharge Hole
Overall Dimensions: 5-1/2' L x 4' W x 140" H (Standing Up)

Machine Overall Dimensions without Dust Collector: 13-1/2' L x 8' W x 178" H

Return to previous page

All sales are subject to our TERMS & CONDITIONS