View Our Inventory

15" x 50" CLAUSING COLCHESTER ENGINE LATHE



Description & Specifications

15"x 50" CLAUSING COLCHESTER ENGINE LATHE
PRICE: Loaded on Truck, Our Warehouse, York, PA …$3,000.00 AS IS

HMC Stock No. 18335-P
Machine Serial No. 0354
Machine Model No. V/S Triumph
New Date: 1994

Swing Over Bed: 15.7"
Distance Between Centers: 50"
Swing Over Cross Slide: 9.7"
Spindle Bore: 2.125"
Spindle Nose: D1-6 Camlock
Spindle Speeds: 14 to 275 RPM
40 to 795 RPM
125 to 2500 RPM
Cross Slide Travel: 9.8"
Compound Travel: 5.1"
Tailstock Quill Travel: 5.5"
Tailstock Taper: No. 5 Morse
Feeds: .0014 to .048 Inches per Rev
(51) Metric Threads: .2 to 14 mm
(56) Imperial Threads: 2 to 56 TPI

EQUIPPED WITH:
2-Axis Digital Readout
Steady Rest
3-Jaw Chuck
Collet Attachment
Manual
Coolant Tank
Variable Frequency Drive
Voltage Transformer
Wired for 3 Phase, 60 Cycle, 240 Volts

THE FOLLOWING PROBLEMS ARE KNOW ON THIS MACHINE:
●Tailstock Clamp Requires Parts to be Fixed
●Half Nut Engagement Lever is Locked Up and Will Not Move
●Missing LED Read Out for Speed in Variable Frequency Drive
(Condition of Drive is Unknown. It is Believed to Need at Least a New Rheostat.)
●Condition of DRO is Unknown. (Notes from Previous Owner Suggest One Axis May Need a New Reader Head.)
●Head Stock Gears Appear to be in Good Condition.
●Head Stock Noises While Gears are Spinning Sounds Like at Least One if Not Several
Bearings are in Need of Replacement. (Cannot Specifically Identify Which Bearing(s) Need to be Replaced.
The Head and Stock Gears and Shaft Would Need to be Removed to Determine.)

Overall Machine Size: 100" L-R x 55" F-B x 65" H
Machine Weight: 4,000 Lbs.


Return to previous page

All sales are subject to our TERMS & CONDITIONS