CLAUSING 13" X 40" GAP BED ENGINE LATHE
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $10,500.00
HMC Stock No. 19011
Machine Serial No. LG0063
Machine Model No. M-300
New Date: 2010
CAPACITY:
Height of Center: 6.7"
Swing Over Bed: 13.75"
Swing in Gap: 19"
Width in Front of Face Plate: 4.6"
Swing Over Cross Slide: 7.75"
Bedway Width: 12.5"
HEADSTOCK:
Spindle Bore: 1.57"
Spindle Nose: D1-4 Camlock
Spindle Nose Taper: #3 Morse
Number of Spindle Speeds: 12
Speed Range: 40 to 2500 RPM
CROSS/TOP SLIDE:
Travel of Cross Slide: 7.5"
Width of Cross Slide: 5.5"
Travel of Top Slide: 3.63"
Width of Top Slide: 3.25"
FEEDS & THREADING:
Longitudinal Feed Range: .001 to .8 Inch Per Rev. & .03 to 2 mm Per Rev.
(35) Inch Threads: 2 to 56 TPI
(39) Metric Threads: .2 to 14 mm
(13) Diametral Pitch Threads: 8 to 56 DP
(18) Module Threads: .3 to 3.5 MOD
EQUIPPED WITH:
Geared Headstock
Hard Ways
Sony 2-Axis Digital Readout
Taper Attachment
Chuck Guard
Rear Splash Guard
Swing Up Chip Guard
Aloris BXA Toolpost with Assorted Holders
5C Collet Tube with Assorted Collets
4" Steady Rest
Follower Rest
(2) 6" 3-Jaw Chucks
(2) 8" 4-Jaw Chucks
12" Face Plate
Coolant Pump & Piping
3 HP Motor
Wired for 3 Phase, 60 Cycle, 220 Volts
Overall Size: 75" L-R x 40" F-B x 62" High x 1,000 Lbs.
