BRIDGEPORT CNC VERTICAL MILL
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $14,500.00
HMC Stock No. 19052-P
Machine Serial No. 216821
Machine Model No. Series I
New Date: 1981/Rblt and controlled 1995
Standard Series I Bridgeport Vertical Mill Retrofit with a 4-Axis CNC Automation System M3X Control.
The Machine has Been Fit with 3-Axis Ball Screws and Servo Motors. Can do 3 axis contouring. 4Th axis is for rotary table or other accessory. Vertical Knee Control is the Z Axis. Quill travel is manual control only.
Also included is a spare Systems M3X control unit for parts.
Table Size: 9" x 42" with (3) T-Slots
Longitudinal Travel Manual (X Axis): 30" Approx.
Saddle Cross Travel (Y Axis): 12"
Vertical Knee Travel (Z Axis): 16"
Quill Travel: 5"
Quill Power Feeds: .0015", .003", .006" Per Revolution
Ram Travel: 12"
Ram Turret Rotation: 360 Degrees
Spindle Taper: R8
Variable Spindle Speeds: 60 to 4200 RPM
Knee Ways in Excellent Condition
Quill and Knee Crank Handles
Manual Tool Draw Bar
Ultron Snap Quick Change Tool System (No Tool Holders, Can be Easily Removed)
Bijur One Shot Lubrication System
Bijur Fluid-Flex Spray Mist Coolant System
Accordion Way Cover on Front (Only) of Knee
Mitutoyo Digital Vernier Caliper for Reading Quill Position
Serial No. 951010K8
Control Servo Enable for: X-Y-Z-4
Coolant On – Off
Spindle Control for: On CCW – Off – Auto – On CW
Jog Hand Wheel
Feed Rate Override %
Normal or Feed Hold Cycles
Custom Keyboard and 17" Dell Ultra Sharp CRT Screen
Also Has a Complete Operational Spare Control Unit that was taken Off a Similar Machine
2 HP Motor, Wired for 3 Phase, 60 Cycle, 230/460 Volts
Presently Wired For 220 Volt Operation
Machine: 60" LR x 52" FB x 81" High (Without Skid) x 2,750 Lbs.
Control: 30" LR x 18" FB x 46" High (Is on Wheels)
On Skid: 72" LR x 59" FB x Skid Only is 8" High
Spare Control: 30" LR x 18" FB x 46" High (Is on Wheels)