View Our Inventory


Description & Specifications

PRICE: Loaded on Truck, Our Warehouse, York, PA …… $ POR

HMC Stock #19149-C
Machine Serial No. 1159776
Machine Model No. DM-2
New Date: 2019

This machine is on consignment. Any offer is welcome but subject to the consignee's approval. Since the machine is being sold on behalf of the owner, (not owned by Hildebrand Machinery) it is being sold "As Is". Payment must be guaranteed funds or company check must clear bank account before release of this machine. All specifications must be verified by the purchaser for accuracy.

Table Size: 34" LR x 15" FB with (3) T-Slots
T-Slot Width: .630"
T-Slot Center: 4.92"
Maximum Weight on Table: 250 Lbs.
X Axis Travel: 28"
Y Axis Travel: 16"
Z Axis Travel: 15.5"
Spindle Nose to Table: 6" Minimum to 21.5" Maximum
Spindle Taper: CAT-40
Spindle Speed: 12,000 RPM
Drive System: Direct Drive
Maximum Torque: 46 ft-lbf @ 1,700 RPM
Maximum Cutting Feed Rate: 1,200 IPM
Rapids on X, Y, Z: 2,400 IPM
Tool Changer Type: SMTC
Tool Changer Capacity: 18 + 1
Maximum Tool Diameter: 2.5"
Maximum Tool Length: 7"
Maximum Tapping Speed: 5,000 RPM
Coolant Capacity: 55 Gallons
Air Required: 4 scfm at 100 PSI
Machine is Wired 3 Phase, 220 Volts

Overall Machine Size: 84" LR x 84" FB x 100" H
Coolant System Size: 36" FB x 84" LR x 45" H

Tooling Taper (BT/CT): CT Option
·Standard Program Memory, 1 GB
·55 Gallon (208 Liter) Coolant Tank with 3/4 HP (0.6 kW) Pump
·Early Power-Failure Detection Module
·Ethernet Interface
·HaasConnect: Remote Monitoring of your Haas Machine. Requires the Machine to be
Connected to the Internet
·Lifting Provision; Built-in Attachment Points for Lifting the Machine
·Media Display M-Code; M-130 is Used within an NC Program to Call Up Media Files
(Images, Videos, PDF Files) from Memory and Display Them on the Control Screen as the
Program Runs. NextGen Control Only.
·Rigid Tapping
·Side-Mount Tool Changer, 40 Taper, 18 + 1 Tools
·1-Year Standard Warranty
Visual Part Programming System
User-Definable Macros
Spindle Orientation
Coordinate Rotation and Scaling
Rotary-Axis Calibration Tool. Note: The Master Gauge-Length Tool Will be the Same Taper as the Machine.
12,000 RPM Spindle, 40 Taper, 15 HP (11.2 kW) Vector Drive, Inline Direct-Drive; Requires Balanced Toolholders with G2.5 Rating Above 10,000 RPM.
Through-Spindle Coolant, 300 psi (21 Bar)
4th-Axis Drive and Wiring
5th-Axis Drive and Wiring (4th-Axis Drive Not Included)
Wireless Intuitive Probing System; Renishaw. Includes the Haas Visual Programming System,
Macros, Spindle Orientation and Coordinate Rotation and Scaling.
Automatic Air Gun
Chip Auger
Programmable Coolant Nozzle. Coolant System is Required.
Through-Tool Air Blast. Requires the Haas Through-Spindle Coolant Option. For Inline Spindles Only.
Dynamic Work Offsets and Tool Center Point Control
High-Speed Machining
Auxiliary Coolant Filter System 

Return to previous page

All sales are subject to our TERMS & CONDITIONS