View Our Inventory

CLAUSING COLCHESTER ENGINE LATHE



Description & Specifications

17" X 40" CLAUSING COLCHESTER ENGINE LATHE
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $12,500.00

HMC Stock # 20154
Machine Serial No.: 17596
Machine Model No.: 17"
New Date: Unknown

Swing Over Bed: 17"
Swing Over Cross Slide: 10.5"
Swing in Gap: 28"
Length in Front of Spindle Nose: 8.5"
Spindle Bore: 3"
Spindle Nose Type: D1.8" Camlock
Spindle Taper: #5 Morse
(16) Spindle Speeds in (4) Ranges: 20 to 1600 RPM
Distance Between Centers: 40"
Center Height: 9"
Cross Slide Travel: 11"
Top Slide Width: 5"
Top Slide Travel: 6"
Tailstock Quill Diameter: 2.9375"
Tailstock Quill Travel: 9"
Tailstock Taper: #5 Morse
Tailstock Set Over: 1/2"
Leadscrew Thread: 4 TPI
(40) Metric Threads: 0.4 to 14.0 mm
(38) Inch Threads: 2 to 72 TPI
(18) Modular Threads: 0.3 to 3.5 MOD
(27) Diametral Threads: 8 to 60 DP
Metric Feeds (R10 Series): 0.06 to 1.0 mm
Inch Feeds (R10 Series): 0.002 to 0.032"
Cross Feeds = Half Longitudinal (Approx.) Values
Distance Floor to Spindle Center: 44.13"

EQUIPPED WITH:
Bison 3 Jaw Chuck with 2 Piece Hard Reversible Top Jaws, D8 Mount
Wrench for Chuck and Camlock System
Halogen Work Light
Thread Chasing Dial
5C Collet Nose Adapter for Headstock (NO Draw Tube or Closer System)
Coolant Pump and Piping
Mitutoyo KA Counter 2 Axis Digital Readout System KA-12
13-1/2" Diameter Face Plate with D8 Mount
1/8-3/4" Jacobs Key Type Drill Chuck with #5 Morse Taper and Chuck Key
Hardened and Ground Bed Ways in Excellent Condition
Full Length Rear Splash Guard
Aloris CA Quick Change Tool Post with (9) Assorted Aloris Tool Holders
Machine Work Light
OEM Parts / Operation Manual
1/20 HP Coolant Pump Unit
10 HP Main Motor, Wired for 3 Phase, 60 Hz, 230 / 460 Volts
Presently Wired for 230 Volt Operation

Overall Size: 100" Long x 45" Wide x 66" High x 4,800 Lbs.


Return to previous page

All sales are subject to our TERMS & CONDITIONS