CARLTON 5' X 11" RADIAL DRILL
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $19,500.00
HMC Stock # 21027
Machine Serial No.: 1A-4464
Machine Model No.: 1A
New Date: 8-1992
Arm Length: 5'
Column Diameter: 11"
Face of Column to Center of Spindle: 9" Min. to 60" Max.
Spindle to Base: 14-3/4" to 4' 7" (without 11-3/4" Rise Block)
Working Surface of Base: 3' x 5' 6"
Vertical Travel of Spindle in Head: 12"
Quill Diameter: 2-1/2"
Quill Travel: 12"
(6) Quill Feeds: .004,.006,.008, .012, .018, .025 IPR
Taper in Spindle: #4 Morse
(24) Spindle Speeds: 40 to 1500 RPM
Drilling Capacities: 2" Mild Steel, 2-1/4" Cast Iron
Traverse of Arm on Column: 2' 4-1/2"
Traverse of Head on Arm: 4' 3"
Drills to Center of a 10' Circle
L Section Base Size: 29" x 25" x 8-1/4"
Main Base Size: 36" x 66" x 8-1/4" Thick with (3) T Slots
EQUIPPED WITH:
Power Elevation of Arm on Column
Rapid Traverse of Head on Arm
Power Clamping of Column and Arm
Manual Clamping of Head on Arm
Arm Has Replaceable Wear Strips for Head
Machine Work Light
Friction Clutch for Forward and Reverse Engagement
11-3/4" Rise Block Under Column, is Removeable
Bolt-On L Section Base with (2) T Slots
Adjustable Quill Depth Stop
Tilting Box Table Size:
Top: 28" x 32" x 24" High, Face: 28" x 18", Tilts 0-90 Degrees
Tapping Lead are Same as Feed Rates
OEM Parts / Operation Manual and Foundation Print & Electrical Schematic
1/2 HP Coolant Pump Motor with Piping, 3 Phase, 230/460 Volts
10-5 HP 2-Speed Main Motor
Wired for 3 Phase, 60 Hz, 460 Volts ONLY
Overall Size:
123" LR x 66" FB (with L Base) x 115" High (riser blocks installed, on 4" blocks) x 10,500 Lbs.
