View Our Inventory

JONES & SHIPMAN UNIVERSAL CYLINDRICAL GRINDER



Description & Specifications

10" X 27" JONES & SHIPMAN UNIVERSAL CYLINDRICAL GRINDER
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $14,500.00

HMC Stock # 21032-P
Machine Serial No.: Unknown
Machine Model No.: 1300
New Date: Unknown

Maximum Swing: 10"
Distance Between Centers: 27"
Adjustment of Table (Included Angle): 17 Degrees
Longitudinal Table Speed: 3 to 144 Inches per Minute
Minimum Stroke of Table: .040"
Manual Table Traverse per Revolution of Handwheel: .5"
Fine Hand Feed Traverse Knob Graduations: .0002"
Feed at Reversal of Table, Reduction in Diameter: .0002" to .0012"

WHEEL HEAD:
Wheel Head Swivel: 180 Degrees Each Side of Normal Position
Cross Feed Handwheel Dial Graduations: .0002"
Auto Infeed at Table Reversals: .0001" to .0006"
One Press of Fine Feed Lever: .0001" Off Diameter
Wheel Speeds: 1,750 and 2,300 RPM
Wheel Size: 12" O.D. x 1" Thick x 5" Mounting Hole
Cross Traverse of Wheel Head: 7"
Internal Grinding Speeds: 16,000 RPM, 9,900 RPM,
and 23,000 RPM with Correct Internal Spindles
*Not Equipped with All Necessary Internal Spindles
Internal Grinding Capacity: 3/4" x 2" Diameter

WORK HEAD:
Spindle Speeds: 40, 60, 90, 140, 210, 320 RPM
Spindle Taper: #3 Morse Taper Sleeve
(Internal Taper is Believed to be #45)
Swivel of Work Head: 0 to 90 Degrees
Work Head Center Type: Live or Dead Center
Maximum Distance Faceplate (Work Yead at 90 Degrees)
and New Grinding Wheel: 2-3/16”
Taper in Tailstock: #3 Morse

EQUIPPED WITH:
EIU Type Wheel Head
Built-In Internal Grinding Drive in Wheel Head that Uses Cartridge Type Spindles
Continuous In-Feed (Plunge Grinding)
Self-Contained Internal Hydraulic System
Coolant Pump - NO Tank
Table Mounted Wheel Dresser
5" 6-Jaw Chuck
(1) Steady Rest, Rollers Type 3 Point
(1) Steady Rest, 2 Point
(2) Internal Grinding Spindles
(3) Wheel Hubs
One Shot Lubrication Pump
Work Light
5-1/2 HP Main Motor
Wired for 3 Phase, 60 Cycle, 220 Volts
Overall Size: 96" LR x 55" FB x 75" High x 5,400 Lbs.

Machine Has Been Reconditioned by Andmar Machinery Services


Return to previous page

All sales are subject to our TERMS & CONDITIONS