PANDJIRIS 3,000 LB WELDING POSITIONER
PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $12,500.00
HMC Stock # 22234
Machine Serial No.: 18309X 01-10
Machine Model No.: 30-6
New Date: 2011
The Model 30-6 Positioner has a 3,000 lb. weight capacity with a 6" overhung and eccentricity rating. These all welded steel construction positioners come with heavy plate tilt and rotation spur gears precisely machined. A high reduction worm gear reducer is used to enhance the smooth fluid movements of the rotation and tilt gears. Solid state controls and dynamic braking are provided. Unit comes with a pendant controller on a 25' heavy duty rubber covered cable. All wiring is to the National Electrical Code.
Rated Capacity: 3000 Lbs. @ 6" From Table Face
Table Size: 30" x 30" Square
Push Button Pendant Control
Variable Speed Power Table Rotation
Power Tilt Tilt Range: 0° to 135°
Variable Table Rotation Rate: .07 to 1.40 RPM
Table Height: 33" to 53"
Height Adjustment Method: Manual/Pins, 5 Positions
Centerline Height, Table @ 90° : 31-1/4" to 51-1/4"
Swing Radius, Table @ 90° : 28" to 47"
Eccentricity: 6"
Overhung: 6"
Rotation Motor: 1 HP DC
Tilt Motor: 3/4 HP AC Brake
Unit Leg Length: 48-5/8" Each Side
Width (Base | Overall): 30-1/2" | 39-1/4"
Control: Pendant Control of Table
Forward, Stop, Reverse, Speed and Weld Rapid
Controls Operate on 115V
Tilt UP/DN Control on Side of Control Panel
LOAD CAPACITY INFORMATION:
Rated Eccentric Torque: 18,000 Inch Pounds
Max. Allowable Torque Resulting from Overhung Weight (From Tilt Centerline): 35,250 Inch Pounds
Table Surface to Tilt Axis Distance: 5.75 Inches
Allowable Workpiece Weight: Pounds (See Table Below)
Distance from Table Surface to Workpiece CG: Inches (See Table Below)
EQUIPPED WITH:
Pandjiris Model A 3-Jaw Gripper Chuck with Bar Jaws and Wrench
Pandjiris OEM Manual and New Schematics of the New Electrical Controls
Electrical Pendant Control
Wired for 3 Phase, 60 Hz, 440 Volts ONLY
Note: Jan. 2023, the original electrical circuit board controls were replaced with new controls with Variable Frequency Drive unit.
Overall Size: 38" LR x 58" FB x 56" High (Table Vertical) x 1,900 Lbs.
