Tooling
Tooling Quick Search
View Tooling Categories
The list below shows the newest/just purchased tooling inventory. Use the tooling categories drop down above to search our full tooling inventory.
| Item | Description | Category | Sub Category | Size | Price | Qty | SK# | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | 3430 | Gesswein ultrasonic polishers with accessories, model Ultramax DF, serial no.. M52-0191, (2) Sonotec tool holders, 2 blue bins of unused polishing materials and accessories. Unit is in working order. | Other Stuff | Other | ultramax-DF | $2500 FOR ALL | 1 | conf room |
||||||||
 | 3429 | Lathe safety chuck wrench, unused | Lathe Tooling and Accessories | Miscellaneous | 11/16" square for 3/4" x 12" long | $95 EACH | 1 | 4a |
||||||||
 | 3428 | Lathe safety chuck wrench, unused | Lathe Tooling and Accessories | Miscellaneous | 15/32" square for 1/2" x 8" long | $50 EACH | 1 | 4a |
||||||||
 | 3427 | Bison set tru 6 jaw lathe chuck, #3865012-1/2, 1087-97, plain back with hard master jaws with (cut)soft top jaws (no hard top jaws) and wrench | Lathe Tooling and Accessories | Lathe Chucks 6 Jaw | 12-1/2" dia. X 4" thru hole, 7" dia. X 3/4" deep mount for adapter plate, no adapter provided | $1250 EACH | 1 | rack |
||||||||
 | 3426 | Pinch roller, mfgr unknown, manual hand crank | Other Stuff | Miscellaneous | (2) 3" wide rolls x 1-5/8" diameter, thickness capacity inknown | $75 EACH | 1 | 4a |
||||||||
 | 3423 | Harig /AB 5C spin - indexer, serial no. 7698 with Baldor 0.7 hp variable speed motor drive, NOTE: MOTOR FUSE ANS FUSE CAP MISSING | Collets-All Types | Indexer | 5c | $1250 EACH | 1 | 4a |
||||||||
 | 3422 | phase ii 5c spin index fixture, sn. BE11024, stock no. 225-204, no collects | Collets-All Types | Indexer | 5c | $100 EACH | 1 | 4a |
||||||||
 | 3421 | Sine chuck, magnetic, mfgr unknown, permanent magnetic | Inspection Items | Sine Plates | 6" x 6" x 4-3/4" high | $450 EACH | 1 | 1a |
||||||||
 | 3419 | angle plate, mfgr unknown, caqst iron construction | Angle Plates and Setup Blocks | Angle Plate | 6"x6"x6" x3/4" wall thickness | $45 EACH | 1 | 1a |
||||||||
 | 3418 | Sunspot EDM tool blocks | Tool Holders Quick Change and Misc | Miscellaneous | 2-3/4" cube with .780" dia. Thru hole | $35 EACH | 2 | 4a |
||||||||
 | 3417 | Servo power feed unit for Bridgeport mill table, type 150, sn. 150-587014, complete setup | Mill Tooling and Accessories | Attachments | $750 EACH | 1 | 4a |
|||||||||
 | 3410 | Cleveland Twist Drill counter bore & spot facer set with straight shank, set #39 | Drill Tooling and Accessories | Other | 1/4" to 1" may not be complete | $100 For All | 1 | 005 |
||||||||
 | 3409 | setup block, steel frame | Angle Plates and Setup Blocks | Angle Plate | 11-3/4" x 11-3/4" x 9-3/4" wide with 1-1/2" thick walls | $175 Each | 1 | 14F |
||||||||
 | 3408 | Cast Iron setup block | Angle Plates and Setup Blocks | Angle Plate | 8" x 6" x 8" | $125 Each | 1 | 14F |
||||||||
 | 3407 | Cast Iron setup block | Angle Plates and Setup Blocks | Angle Plate | 8" x 6" x 8" | $125 Each | 1 | 14F |
||||||||
 | 3406 | Lyon pallet racking, (2) end pcs and (4) rails = 1 section | Other Stuff | Other | 48" wide x 96" long x 84" high x 330 Lbs. per beam rail | $350 For all | 1 | floor |
||||||||
 | 3405 | Lista 5 Drawer cabinet with maple top work bench assembly, top is in very good condition | Other Stuff | Other | 29" x 72" x 35" high | $500 Each | 1 | floor |
||||||||
 | 3404 | Brunner Engineering Mfg compressed air receiver, vertical style with feet, assorted tank ports, motor mount bracket on top, 200 psi, new 1999 | Other Stuff | Other | 60 gallon | $100 Each | 1 | floor |
||||||||
 | 3400 | Rotary phase converter, mfgr unknown, designed to run 220V AC 3 phase motors on 220V AC single phase house current. Will not work on any other 3 phase equipment. | Other Stuff | Other | estimated at 7-1/2 HP | $500 Each | 1 | 13F |
||||||||
 | 3398 | Dorian lathe tool holder, insert type, #nsl20-3d, left hand, uses TopNotch NG-3l inserts, items is as new unused | Lathe Tooling and Accessories | Tool Holder | 1-1/4" x 1-1/4" x 6" OAL | $60 EACH | 1 | 016 |
||||||||
 | 3397 | Erickson floating tap holder #cv50tch668, missing collect and collar | Tool Holders Cat 50 | Tap Drivers | large | $50 EACH | 1 | 016 |
||||||||
 | 3394 | lovejoy slot cutter, insert type, #6nxs14-6h with homemade stub arbor | Mill Tooling and Accessories | Cutters | 6" dia x approx. 1" wide | $75 EACH | 1 | 016 |
||||||||
 | 3393 | ingersoll milling cutter, insert type #3sj6l-0610058r01-3028173, 6 tooth | Mill Tooling and Accessories | Cutters | 6" dia. X 1-1/2" bore | $100 EACH | 1 | 016 |
||||||||
 | 3392 | Tailstock, mfgr unknown, adjustable for height and in-out | Tailstocks | Tailstock | 8-3/4" center height +/- | $50 EACH | 1 | 4a |
||||||||
 | 3391 | Lathe Steady Rest, mfgr unknown with solid brass support tips | Lathe Tooling and Accessories | Steady Rest | 4-1/4" dia x 6-1/2" flat way to cl | $75 EACH | 1 | rack |
||||||||
 | 3390 | Lathe Steady Rest, mfgr unknown with solid brass support tips | Lathe Tooling and Accessories | Steady Rest | 5" dia. X 7-1/4" flat way to CL | $100 EACH | 1 | rack |
||||||||
 | 13025 | 12" KITAGAWA 2-JAW HYDRAULIC CHUCK, Serial # 9M7, Model: BT-12, Max RPM: 3000, 3" Thru Hole, No Draw Tube or Actuator, Soft Top Jaw | Lathe Tooling and Accessories | Lathe Chucks 2 Jaw | 12" | $75 Each | 1 | rack |
||||||||
 | 12257 | 6" steady rest, mfgr unknown, roller bearing supports | Lathe Tooling and Accessories | Steady Rest | 6" dia x 10-1/2" bottom to CL | $250 Each | 1 | rack |
||||||||
 | 12256 | 9" NAME UNKNOWN 2-JAW CHUCK, Thru Hole: 1-3/4", Mounting Type: Flat Back Jaws Open and Close Independently | Lathe Tooling and Accessories | Lathe Chucks 2 Jaw | 9" | $75 Each | 1 | rack |
||||||||
 | 12255 | 12" BURNERD 4-JAW INDEPENDENT CHUCK ,1-Piece Reversible Jaws, 3" thru hole, Originally a D-8 Camlock Mount But is Missing All the Pins | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 12" | $200 Each | 1 | rack |
||||||||
 | 3354 | Lathe adapter plate, mfgr unknown, l2 mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 7-1/4" dia x L2 | $50 Each | 1 | rack |
||||||||
 | 3353 | Lathe adapter plate, mfgr unknown, l2 mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 7-15/16" dia x L2 | $50 Each | 1 | rack |
||||||||
 | 3352 | 10" Drive plate, mfgr unknown, with 11.82" plated bolted to it, used as a chuck adapter plate for L2 mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 10" dia x L2 | $50 Each | 1 | rack |
||||||||
 | 3351 | 12" Cushman 4 jaw chuck #4700112l01a-3F, 3" thru hole with 1 piece solid hard reversible jaws, L1 mount | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 12" | $200 Each | 1 | rack |
||||||||
 | 3350 | 12" Cushman 3 jaw chuck #12236E5, 3" thru hole with 2 piece hard reversible top jaws, L1 mount | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 12" | $200 Each | 1 | rack |
||||||||
 | 3349 | 12" Pratt Burnerd 3 jaw chuck with 2 piece jaws with hard reversible top jaws, 4" thru hole, bolt on adapter plate, L1 mount | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 12" | $200 Each | 1 | rack |
||||||||
 | 3348 | 12" Mfgr unknown 3 jaw chuck #2124R, 3-1/4" thru hole, master jaws no top jaws, adjusta-tru design, L2 mount | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 12" | $200 Each | 1 | rack |
||||||||
 | 3347 | 10" Cushman 3 jaw chuck #4710210l01a-6F, 2 5/8" thru hole, 2 pice hard reversible top jaws, L1 mount | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 10" | $150 Each | 1 | rack |
||||||||
 | 3345 | Face plate, mfgr unknown, A6 mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 24" dia | $100 Each | 1 | rack |
||||||||
 | 3344 | Face plate, mfgr unknown with L0 back | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 14" dia | $50 Each | 1 | rack |
||||||||
 | 3343 | adaptor plate d4 camlock, 1 of 3 pins is missing | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 7-15/16" dia x 7/8" thick | $20 Each | 1 | rack |
||||||||
 | 3342 | 12" BTC 6 jaw chuck, has 3 master jaws with 1 piece hard revesible top jaws, 3 master and top jaw assemblies missing, adjusta tru design with bolt on adapter plate for D8 camlock | Lathe Tooling and Accessories | Lathe Chucks 6 Jaw | l2" | $125 Each | 1 | rack |
||||||||
 | 3341 | 10" Buck 3 jaw chuck, no master or top jaws, adjusta tru design with bolt on adapter plate for D8 camlock | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 10" | $50 Each | 1 | rack |
||||||||
 | 3340 | 8 1/4" Buck 6 jaw chuck, has 3 master jaws, 3 master jaws missing, no top jaws, adjusa tru design with bolt on adapter plate for D6 camlock | Lathe Tooling and Accessories | Lathe Chucks 6 Jaw | 8 1/4" | $100 Each | 1 | rack |
||||||||
 | 3339 | 8 1/4" 4 Jaw chuck, mfgr unknown, 1 piece hard reversible jaws, plain back, no adapter | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 8 1/4" | $100 Each | 1 | rack |
||||||||
 | 3337 | 7 1/2" 3 jaw chuck, mfgr unknown, plain back with adjusta tru design, one piece solid hard jaws for OD chucking only | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 7 1/2" | $150 Each | 1 | rack |
||||||||
 | 3336 | 7 1/2" Buck 3 jaw chuck, has master jaws, top jaws missing, plain back with adjusta tru design, no adapter plate | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 7 1/2" | $100 Each | 1 | rack |
||||||||
 | 3334 | 6" Buck 3 jaw chuck, serial no. 2063RD, flat back with bolt on adapter plate, D4 camlock mount, 2 piece hard reversible top jaws | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 6" | $150 Each | 1 | rack |
||||||||
 | 3333 | 8" Bison 3 jaw chuck #7883, type 3565-8, tru set adjustable mount, plain back, 2 piece hard reversible top jaws, with wrench, serial no.100273 | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 8" | $200 Each | 1 | rack |
||||||||
 | 3332 | STEADY REST, MFGR UNKNOWN, 3 1/2" CAPACITY, flat way to centerline 7 1/4" | Lathe Tooling and Accessories | Steady Rest | 3-1/2" | $50 Each | 1 | rack |
||||||||
 | 3331 | steady rest, mfgr unknown, bronze tips, flatway to centerline 7", | Lathe Tooling and Accessories | Steady Rest | 4-1/2" | $75 Each | 1 | RACK |
||||||||
 | 1335 | Steady rest, mfgr unknown, 6" capacity, solid supports, 8-3/4" flat way to centerline | Lathe Tooling and Accessories | Steady Rest | 6" | $100 Each | 1 | rack |
||||||||
 | 1477 | 9" Drive plate, mfgr unknown, d6 camlock mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 9" | $20 Each | 1 | rack |
||||||||
 | 3346 | 16" Pratt Burnerd 4 jaw chuck, 1 piece hard reversible jaws, D8 camlock mount | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 16" | $250 Each | 1 | rack |
||||||||
 | 2998 | Brown & Sharpe OD micrometer #599-5-34, edp 51118 with carbide anvil faces and .0001" resolution | Inspection Items | Micrometers, OD | 4" to 5" | $60 Each | 1 | conf room |
||||||||
 | 3013 | Teclock dial indicator, model A1-951D, jeweled, .001" resolution, 0-100 dial reading | Inspection Items | Indicators | 2" range | $50 EACH | 1 | conf room |
||||||||
 | 3012 | Fowler 52-475-025 Chrome Steel X-BLOX-JR Precision V-Block Set | Inspection Items | V Blocks | 0.030" to 1.285" | $50 for all | 1 | conf room |
||||||||
 | 3009 | Federal dial indicator #c8is, .001" resolution, 1" travel with wood box | Inspection Items | Indicators | 1" | $25 EACH | 1 | conf room |
||||||||
 | 3005 | Etalon vernier caliper, made in switzerland, .0001" resolution with wood case | Inspection Items | Calipers | 0-6" | $25 EACH | 1 | conf room |
||||||||
 | 3003 | Carl Mahr indicating micrometer #40SF with carbide anvil faces, .0001" resolution and wood case | Inspection Items | Micrometers, OD | 0-1" | $50 EACH | 1 | conf room |
||||||||
 | 3001 | Mfgr Unknown OD micrometer, made in Poland with .0001" resolution, standard, carbide anvil faces, wrench and wood box | Inspection Items | Micrometers, OD | 3-4" | $45 EACH | 1 | conf room |
||||||||
 | 3000 | Mitutoyo OD micrometer #101-120, M220-4"V with carbide anvil faces, .0001" resolution, ratchet thimble, standard, wrench and case | Inspection Items | Micrometers, OD | 3-4" | $50 EACH | 1 | conf room |
||||||||
 | 2997 | Mitutoyo OD micrometer #101-119, M220-3"V with carbide anvil faces, .0001" resolution, ratchet thimble, standard, wrench and case | Inspection Items | Micrometers, OD | 2-3" | $45 EACH | 1 | conf room |
||||||||
 | 2996 | Mitutoyo OD micrometer #103-220, OM-6"V with carbide anvil faces, .0001" resolution, ratchet thimble, standard, wrench and case | Inspection Items | Micrometers, OD | 5-6" | $75 EACH | 1 | conf room |
||||||||
 | 1433 | bison 3 jaw chuck, plain back, 2 piece jaws with hard reversible top jaws | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 6-1/4" | $100 EACH | 1 | chuck rack |
||||||||
 | 3330 | J&S tool fluidmotion radii and angle wheel dresser with 4 diamonds and case, sn f4359, . | Grinder Tooling and Accessories | Dresser | for dressing up to 7" dia wheels | $250 EACH | 1 | conf room |
||||||||
 | 3317 | Heinrich Tools air collect fixture #1AC with hand air value and pressure regulator | Mill Tooling and Accessories | Collet Chucks | for 5C collects | $150 Each | 1 | 14a |
||||||||
 | 3315 | glendo series II accu-finish tool ghrinder serial no Af2871, bench top model with (2) wheels, 110 volts and work light | Grinder Tooling and Accessories | Other | 6" dia wheel face | $950 Each | 1 | 4a |
||||||||
 | 3313 | Interstate Double Angle Cutter, Cobalt | Mill Tooling and Accessories | Cutters | 1" dia cut x 3/8" shank, 90 degree | $35 Each | 1 | 027 |
||||||||
 | 3312 | Bokum too lco tool setting gage, aprt no AB-1 | Grinder Tooling and Accessories | Other | $25 Each | 1 | 027 |
|||||||||
 | 3311 | kennametal boring bar #e10sctfpr2-l-j3-93 uses triangle insert | Boring Tools | Boring Bar | 5/8" dia x 10" long | $95 EACH | 1 | 027 |
||||||||
 | 3310 | boring bars, mfgr unknown, triangle insert type, 2 pcs. | Boring Tools | Boring Bar | 3/4" dia x 8" lomg | $15 FOR ALL | lot | 027 |
||||||||
 | 3309 | Sandvik Coromant boring bar #rtbap 12 m2 j4, triangle insert type | Boring Tools | Boring Bar | 3/4" dia x 10" long | $15 Each | 1 | 027 |
||||||||
 | 3308 | Homemade boring bars, 3/4" dia x 11-5/8" long and 5/8" dia x 7-5/8" long, 2 pcs. | Boring Tools | Boring Bar | 1/4" cutting bit and 1/8" rd. bit | $15 FOR ALL | lot | 027 |
||||||||
 | 3306 | Kennametal boring bar #s24-ktfpr3, triangular insert type | Boring Tools | Boring Bar | 1-1/2" dia x 14" long | $50 Each | 1 | 027 |
||||||||
 | 3305 | Fowler cylinder gauge, dial type, 0.0005" resolution | Inspection Items | Dial Bore Gages | 2" to 6" range | $20 Each | 1 | conf room |
||||||||
 | 3303 | Bokum boring bar #125sl-11 with bokum 11c bolt on thread cutting head and (1) homemade boring bar | Boring Tools | Boring Bar | 1-1/4" dia x 11-1/2" long bokum bar and homemade bar 1-1/4" dia x 16-1/4" long with 3/8" wide end slot | $25 FOR ALL | lot | 027 |
||||||||
 | 3302 | leforge combination drill counterbore for 1/2" cap screws | Drill Tooling and Accessories | Drill Bits | 13/16" dia drill body x 0.518" point | $25 Each | 1 | 027 |
||||||||
 | 3298 | New Tech Cutting Tools angle milling cutter, insert type, 45 degree cut, 3 inserts, HSM 134 adapter | Mill Tooling and Accessories | Cutters | 2-3/4" dia x 1" dia. Shank holder, cutter is removable | $25 Each | 1 | 027 |
||||||||
 | 3297 | balas collect holder #s12-6-08, no collect | Lathe Tooling and Accessories | Collet Chucks | 1-1/2" x 6" long shank with 1-1/16" threaded thru hole | $50 Each | 1 | 027 |
||||||||
 | 3296 | Universal kwik switch adapter #8044#9 with R8 taper shank. No holders or wrench | Mill Tooling and Accessories | Tool Holder | R8 shank | $75 Each | 1 | 027 |
||||||||
 | 3286 | Drill turret attachment, mfgr unknown, 4 position, 1/2" dia. Mounting pin. Mcro american chucks. No key | Drill Tooling and Accessories | Miscellaneous | 0-1/4" capacity drill chucks with 3/8-24 thread | $50 Each | 1 | 027 |
||||||||
 | 3285 | Valenite cat 45 tool holder #v45ct-s150-40 with valenite 12pos. insert mill cutter #b-6-12r-15-n3 | Mill Tooling and Accessories | Cutters | 6" dia. Cutter | $175 Each | 1 | 027 |
||||||||
 | 3279 | Brown & Sharpe black granite angle plate, serial no 7102, step style | Inspection Items | Angle Plate | 8" wide x 8" high x 5-1/4" deep | $100 Each | 1 | 4a |
||||||||
 | 3277 | Assorted twist drills, mfgr unknown, hs steel, 3 pcs | Drill Tooling and Accessories | Drill Bits | 29/64", 7/8", 1" x 11" OAL x #3 Morse taper shanks | $25 for all | lot | 027 |
||||||||
 | 3276 | Assorted twist drills, mfgr unknown, hs steel, 3 pcs | Drill Tooling and Accessories | Drill Bits | 15/16", 7/8", 1" x 11" OAL x #3 Morse taper shanks | $25 for all | lot | 027 |
||||||||
 | 3275 | Leforge twist drills, 2 pcs. | Drill Tooling and Accessories | Drill Bits | 1-1/4" x #4 Mores taper x 12-1/2" OAL and 1-13/64" x #3 morse taper x 12" OAL | $50 for all | Lot | 027 |
||||||||
 | 3274 | Leforge twist drill, #419459, hs steel | Drill Tooling and Accessories | Drill Bits | 1-1/4" x 13-1/2" OAL. | $50 Each | 1 | 027 |
||||||||
 | 3272 | Brown Sharpe morse taper sleeves, 3 pcs | Mill Tooling and Accessories | Sleeve | #2 Morse taper ID x #9 Brown & Sharpe taper OD | $75 for all | LOT | 027 |
||||||||
 | 3271 | Concentric spring loaded live center | Lathe Tooling and Accessories | Centers | #2 Morse Taper | $125 Each | 1 | 027 |
||||||||
 | 3263 | Morse taper reducer sleeves, mfgr unknown, 3 pcs | Drill Tooling and Accessories | Sleeve | #2 Morse OD x #1 Morse ID | $20 for all | lot | 026 |
||||||||
 | 3262 | Angle plate, mfgr unknown, cast iron | Angle Plates and Setup Blocks | Angle Plate | 8" wide x 16" high x 9" Deep x 1-1/8" Wall | $250 Each | 1 | 14a |
||||||||
 | 3261 | Angle plate, mfgr unknown, cast iron, | Angle Plates and Setup Blocks | Angle Plate | 8" wide x 16" high x 9" Deep x 1-1/8" Wall | $250 Each | 1 | 14a |
||||||||
 | 3258 | Eron angle plate #ur6, stock no E-125, surface ground faces and sides | Angle Plates and Setup Blocks | Angle Plate | 5-1/5" wide x 10" tall x 7" deep x 1-1/4" thick walls | $150 Each | 1 | 14a |
||||||||
 | 3257 | Suburban Tool angle plate #050710, surface ground faces and sides | Angle Plates and Setup Blocks | Angle Plate | 5-1/5" wide x 10" tall x 7" deep x 1" thick walls | $200 Each | 1 | 14a |
||||||||
 | 3256 | Sandvik Coromant modul mill insert cutter #Ra-160, uses (8) 1/2" square inserts | Mill Tooling and Accessories | Cutters | 7" cut x 1-1/2" center hole | $100 Each | 1 | 027 |
||||||||
 | 3255 | Chicago Latrobe twist drill, 2 flute, high speed steel, freshly reground point, not used. | Drill Tooling and Accessories | Drill Bits | 2-1/8", #5 Morse taper x 9" flute length | $80 Each | 1 | 027 |
||||||||
 | 3254 | Chicago Latrobe twist drill, 2 flute, high speed steel | Drill Tooling and Accessories | Drill Bits | 2-1/8", #5 Morse taper x 9" flute length | $75 Each | 1 | 027 |
||||||||
 | 3250 | bay state diamond grinding wheel with wheel arbor, #282442, 6d320r3bc1/16, D1a1 USED | Grinder Tooling and Accessories | Grinding Wheels | 6" x 1-1/4" x 1/8 bore x radius edge | $65 Each | 1 | 027 |
||||||||
 | 3249 | diamond productions diamond grinding wheel with wheel arbor, #25136, 12044b, d220-n100-1/16, USED | Grinder Tooling and Accessories | Grinding Wheels | 6" x 1-1/4" bore | $65 Each | 1 | 027 |
||||||||