PACIFIC 150 TON HYDRAULIC PRESS

PACIFIC 150 TON HYDRAULIC PRESS PRICE: Loaded on Truck, Our Warehouse, York, PA …… $59,500.00 HMC Stock # 20034 Machine Serial No.: A941 Machine Model No.: 1500OBS New Date: 1991 April 2022, the main hydraulic cylinder was re-cromed, reground and new seals installed. Then fully reassembled and test run. Rated Capacity: UP to 150 Tons Bed Size: 49-1/2" LR x 27-5/8" FB Ram Size: 37-1/4" LR x 24" FB Ram Bolster Size: 34" LR x 24" FB x 4-1/4" Thick with 5 T Slots and 3" Dia. Hole Bed Bolster Size: 50" LR x 30" FB x 4-1/2" Thick with Assorted T Slots Opening in Bed For Lower Ram: 22" LR x 17" FB Surface Face of Lower Ram: 20" LR x 15" FB Distance Thru Vertical Frames at Bed Height: 31" Distance Floor To Bed: 31" Ram Stroke: 12" Daylight: 20" May 2022,The main hydraulic cylinder was completely rebuilt EQUIPPED WITH: Hydraulic Cushion Under the Bed (2) Ram Bolster Plates and (1) Bed Bolster Plate Ram and Bd Bolster Plates are Bolted in Place and are Removeable Tonnage Control Settings with Control Valve Indicator Flush Floor Design Ram Stroke Adjustment Knobs with Position Indicators For Each Ram Self Contained Hydraulic System with Radiator Type Oil Cooler Unit Dual Operation Palm Buttons on Moveable Stand Rockford Safety Digital Controls #SSC-150, sn. 1822-030, model ENG000185 Light Safety Curtains with Custom Work Area Guarding Trabon Force Central Lubrication System with Auto Timer Compressed Air Surge Tank Independent Adjustable Tonnage Controls for Each Ram Operational Control Features: Front Light Curtain: On - Off Rear Light Curtain: On - Off Modes: Inch – Single – Continuous Actuating Means: Hand or Foot Pedal (no foot pedal suppled) Knockout: Auto or Manual Speed Change: RA - NP Return Press/Dist: Press – Dist Return Speed: Fast or Slow Program: On - Off Light Curtain and Stroke Limits Warning Lights Digital Keypad and Screen 1/2 HP Oil Pump Motor for Oil Cooler 1/2 HP Fan Motor on Oil Cooler 30 HP Main Hydrauli Motor Wired For 3 Phase 60 Hz 230 / 460 Volts Presently Wire for 440 Volt Operation Overall Size: 67" LR x 99" FB x 148" Tall Fully Assembled x 35,000 Lbs. Height of machine with oil cooler unit removed 133" SEE YOUTUBE VIDEO: https://youtu.be/LNk4QpJuiVI SEE OEM Outline Drawing at : http://www.hildebrandmachinery.com/20034-150TonPacific.pdf Note: control arm should be removed for shipping The main hydraulic tank between the machine frames is not secured to the machine. Pacific strongly recommends the machine not be laid over for shipping unless something is done to properly secure the tank before laying over.