Tooling Inventory
Tooling Quick Search
View Tooling Categories
The list below shows the newest/just purchased tooling inventory. Use the tooling categories drop down above to search our full tooling inventory.
Item | Description | Category | Sub Category | Size | Price | Qty | SK# | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3409 | setup block, steel frame | Angle Plates and Setup Blocks | Angle Plate | 11-3/4" x 11-3/4" x 9-3/4" wide with 1-1/2" thick walls | $75 Each | 1 | 14F |
|||||||
4122 | Suburban Tool cast iron angle plate, model URA081012G, , serial no. 0208, ground face, bottom and sides. Has minor surface rust on bottom surface. | Angle Plates and Setup Blocks | Angle Plate | 8" wide x 12" High x 10" Deep | $500 EACH | 1 | 14A |
|||||||
3943 | (2) ANGLE PLATES, fabricated 3/4" plate steel, machined face and bottom only | Angle Plates and Setup Blocks | Angle Plate | FACE 22" LR x 54" HIGH, BASE 22" x 15" FB each | $200 FOR ALL | LOT | NWPR |
|||||||
3942 | ANGLE PLATE, cast iron, machined face and bottom only, 1295 Lbs. | Angle Plates and Setup Blocks | Angle Plate | FACE 30" LR x 30" HIGH, BASE 30" x 26" FB | $200 EACH | 1 | 12D |
|||||||
4169 | Milford Band Saw Blade, Positive Quad, #3854-34-1.1-PQ-2/3, Unused. | Band Saw Blades | Unused Items | 14' 6" x 1-1/4" x .042" x 2/3 | $50 Each | 1 | 2A |
|||||||
4172 | Lenox Classic Welded Band Saw Blade, # 46873GTBHM144420, Mercurized Half, made in USA, Unused. | Band Saw Blades | Unused Items | 14' 6" x 1-1/4" x .042" x 2/3 VP VR | $50 Each | 2 | 2A |
|||||||
4168 | Lenox Welded Band Saw Blade, #46873GTBHM144420, Made in USA, Mercurized, Contestor GT HMRC, Unused. | Band Saw Blades | Unused Items | 14' 6" x 1-1/4" x .042" x 2/3 VP VR | $50 Each | 2 | 2A |
|||||||
4171 | Lenox Classic Welded Band Saw Blade, # 77536CLB154595, made in USA, Unused. | Band Saw Blades | Unused Items | 14' 6" x 1-1/4" x .042" x 5/8 V VR | $50 Each | 3 | 2A |
|||||||
4170 | Starrett Welded High Speed Steel Band Saw Blade, Powerband, Unused. | Band Saw Blades | Unused Items | 14' 6" x 1-1/4" x .042" x 6-10 /S, variable pitch | $50 Each | 1 | 2A |
|||||||
4055 | ISSCAR BORING BAR, INSERT TYPE, #GHIUR-38.1-3199, #287350MADE IN ISRAEL, | Boring Tools | Boring Bar | 1.500" DIA. X 12" LONG | $150 EACH | 1 | 023 |
|||||||
4187 | C.C. Craley Mfg Co adjustable boring head with acceoosries, #5 Morse tpaer shank | Boring Tools | Boring Tools Adjustable | 6" head OD x 6" long with 1-1/8" holes | $350 FOR ALL | 1 | 12A |
|||||||
3460 | Facing Head for horizontal boring mill, no drive mechanism included | Boring Tools | Facing Head | 18" body dia., 6-5/16" body thickness, 4.135" bore dia., Tslots on 5-7/8" centers, 11-3/4" OD gear ring, 4.235" wide x 11-1/8" long face slot. | $2500 Each | 1 | Floor |
|||||||
3461 | Facing Head for horizontal boring mill,No drive mechanism included. | Boring Tools | Facing Head | 23" body dia., 7-1/4" body thickness, 3.010" bore dia., Tslots on 8" centers, 5-3/8" wide x 14-1/4" long face slot. | $3500 Each | 1 | Floor |
|||||||
4116 | DUMONT BROACHES, #22216, 22215, 44410, 22213, 22205, 66609 | Broaching | Broaching | 5/8-E, 1/2-D, 14MM-D, 3/8-D, 1/8-B, 3/8 SQ. | $350 FOR ALL | 6 | 004 |
|||||||
4113 | ROYAL PRODUCTS 5C STEP COLLECT, PN: 20020 | Collets-All Types | 5C | 2" DIAMETER | $50 EACH | 3 | 004 |
|||||||
3960 | ROYAL PRODUCTS 5C STEP COLLECT, PART # 20022 | Collets-All Types | 5C | 3" Dia. | $50 each | 1 | 023 |
|||||||
3961 | ROYAL PRODUCTS 5C STEP COLLECT, PART # 20022, UNUSED IN OEM BOX | Collets-All Types | 5C | 3" DIA. | $100 Each | 1 | 023 |
|||||||
4112 | ROYAL PRODUCTS 5C STEP COLLECT, PN: 20022 | Collets-All Types | 5C | 3" DIAMETER | $95 EACH | 1 | 004 |
|||||||
3950 | RACK WITH ASSORTED 5 C COLLETCS | Collets-All Types | 5C | ASSORTED | $150 FOR ALL | LOT | 3A |
|||||||
4206 | Lyndex endmill R8 tool holders | Collets-All Types | R8 | 3/4" | $15 EACH | 2 | 4A |
|||||||
4207 | Mfrg Unknown endmill R8 tool holders | Collets-All Types | R8 | 3/4" | $15 EACH | 3 | 4A |
|||||||
4204 | Mfgr Unknown R8 Taper Endmill Holders | Collets-All Types | R8 | 5/8" & 3/4" | $25 FOR ALL | 2 | 4A |
|||||||
4126 | Spring Type Collets, MUST TAKE ALL OR NONE | Collets-All Types | Spring | assorted | $210 FOR ALL | 42 | 3A |
|||||||
4305 | Double Angle Spring Collects, Kennametal, Ericson and others | Collets-All Types | Spring Type | D100 | $10 EACH | 40 | 006 |
|||||||
4306 | Double Angle Spring Collects, Kennametal, Ericson and others | Collets-All Types | Spring Type | D100 | $10 EACH | 40 | 006 |
|||||||
4308 | Double Angle Spring Collects, Kennametal, Ericson and others | Collets-All Types | Spring Type | D200 | $10 EACH | 48 | 006 |
|||||||
4309 | Double Angle Spring Collects, Kennametal, Ericson and others | Collets-All Types | Spring Type | D200 | $10 EACH | 42 | 006 |
|||||||
4307 | Double Angle Spring Collects, Kennametal, Ericson and others | Collets-All Types | Spring Type | D200 | $13 EACH | 42 | 006 |
|||||||
4310 | Double Angle Spring Collects, Kennametal, Ericson and others | Collets-All Types | Spring Type | D300 | $10 EACH | 48 | 006 |
|||||||
4312 | Double Angle Spring Collects, sizes are approximate and not guaranteed, 2" OAL, 2.250" Dia Head | Collets-All Types | Spring Type | DA500, (1) 1-3/16, (2) 1=1/8, (3) 1-1/6 | $85 FOR ALL | 6 | 006 |
|||||||
4311 | Double Angle Spring Collects, sizes are approximate and not guaranteed, 2" OAL, 2.250" Dia Head | Collets-All Types | Spring Type | DA500, (3) 1-3/32, (2) 1-9/32, (1) 1-1/4 | $85 FOR ALL | 6 | 006 |
|||||||
4314 | Double Angle Spring Collects, sizes are approximate and not guaranteed, 2" OAL, 2.250" Dia Head | Collets-All Types | Spring Type | DA500, 1-1/4, 1-3/32, 1-13/32, 1-3/16, 1-1/8, 1-3/32 | $85 FOR ALL | 6 | 006 |
|||||||
4315 | Double Angle Spring Collects, sizes are approximate and not guaranteed, 2" OAL, 2.250" Dia Head | Collets-All Types | Spring Type | DA500, 1-11/32, 1-15/32, 1", 1-3/16, (2) 1-3/8 | $85 FOR ALL | 6 | 006 |
|||||||
4313 | Double Angle Spring Collects, sizes are approximate and not guaranteed, 2" OAL, 2.250" Dia Head | Collets-All Types | Spring Type | DA500, 1-5/8, (2) 1-3/16, 1-3/8, 1-1/8, 1-1/16 | $85 FOR ALL | 6 | 006 |
|||||||
4316 | Double Angle Spring Collects, sizes are approximate and not guaranteed, 2" OAL, 2.250" Dia Head | Collets-All Types | Spring Type | DA500, 7/8, 1-3/32, (3) 1-3/16, 1-15/32 | $85 FOR ALL | 6 | 006 |
|||||||
4103 | 21ST CENTURY COUNTER BORE SET IN WOOD CASE, #070426, HSS, SERIES 400, 400-S-10 | Counterbore | Counterbore | 4-40 TO 1/2" | $50 EACH | 1 | 004 |
|||||||
4102 | 21ST CENTURY COUNTER BORE SET IN WOOD CASE, #070798, HSS, SERIES 5000, 500-S-10 | Counterbore | Counterbore | 4-40 TO 1/2" | $50 EACH | 1 | 004 |
|||||||
3979 | JACOBS ARBOR, #003-08591869, UNUSED | Drill Tooling and Accessories | Arbors | #4 MORSE TAPER TO #2 JACOBS TAPER | $35 Each | 1 | 023 |
|||||||
4056 | JACOBS ARBOR FOR DRILL CHUCK MOUNT, #A0504 | Drill Tooling and Accessories | Arbors | #5 MORSE TAPER X #4 JACOBS TAPER | $45 EACH | 1 | 023 |
|||||||
3941 | DRILL BIT, HSS, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.3594" (23/32" x 13" FLUTE LENGTH | $30 EACH | 1 | 4A |
|||||||
3937 | DRILL BIT, HSS WITH #3 MORSE TAPER | Drill Tooling and Accessories | Drill Bits | 0.3594" (23/32" x 17" Flute Lentgh | $40 EACH | 1 | 4A |
|||||||
3938 | DRILL BIT, HSS, straight shank | Drill Tooling and Accessories | Drill Bits | 0.5937" (19/32" x 12" OAL | $30 EACH | 1 | 4A |
|||||||
3933 | (3) DRILL BITS, HSS, STRAIGHT SHANK. (2) #2 MORSE TAPER SHANKS, (1) STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.5937" (19/32" x 17-3/4" OAL straight shank; 21/32" x 11-1/2" OAL, 9/16" x 14" OAL | $30 FOR ALL | LOT | 4A |
|||||||
3940 | PRECISION COBALT BRONZE M51CO DRILL BIT, TAPER LENGTH, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.5937" (19/32" X 8-3/4" OAL | $30 EACH | 1 | 4A |
|||||||
3931 | (3) DRILL BITS, HSS, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.6250" (5/8" X 12" OAL | $30 FOR ALL | LOT | 4A |
|||||||
3939 | PRECISION COBALT BRONZE M51CO DRILL BIT, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.6250" (5/8" X 8-3/4" OAL | $30 EACH | 1 | 4A |
|||||||
3934 | (2) DRILL BITS, HSS, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.6406" (41/64" x 9-1/2" and 12" OAL | $20 FOR ALL | LOT | 4A |
|||||||
3932 | (2) DRILL BITS, HSS, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.6719" (43/64" X 12" OAL | $20 FOR ALL | LOT | 4A |
|||||||
3935 | (4) DRILL BITS, HSS, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.6875" (11/16" x 11" OAL | $30 FOR ALL | LOT | 4A |
|||||||
3936 | (3) DRILL BITS, HSS, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.6875" (11/16" x 11-3/4" OAL | $30 FOR ALL | LOT | 4A |
|||||||
3930 | (2) Twist Drill Bits | Drill Tooling and Accessories | Drill Bits | 0.7344", 47/64" x 11-1/2" OAL | $20 FOR ALL | LOT | 4A |
|||||||
3980 | Guhring twist drill HSCO, | Drill Tooling and Accessories | Drill Bits | 0.7500" (3/4" x 12" FL x #2 MT | $25 EACH | 1 | 4A |
|||||||
3985 | Precision Twist Drill, HSS | Drill Tooling and Accessories | Drill Bits | 0.7500" (3/4" x 12" OAL x 3/4" Straight Shank | $25 EACH | 1 | 4A |
|||||||
3986 | Union Butterfield Twist Drill | Drill Tooling and Accessories | Drill Bits | 0.7500" (3/4" x 12" OAL x 3/4" Straight Shank | $25 EACH | 1 | 4A |
|||||||
3929 | (2) DRILL BITS, HSS, STRAIGHT SHANK | Drill Tooling and Accessories | Drill Bits | 0.7500" (3/4") X 11-3/8" OAL | $20 FOR ALL | LOT | 4A |
|||||||
3981 | Mfgr unknown twist drill HS | Drill Tooling and Accessories | Drill Bits | 0.7812" (25/32" x 12" FL x 2 MT | $25 EACH | 3 | 4A |
|||||||
3984 | Mfgr Unknown Twist Drill, HS, china | Drill Tooling and Accessories | Drill Bits | 0.8750" (7/8" x 7" FL x 7/8" straight shank x 13" OAL | $30 EACH | 1 | 4A |
|||||||
3987 | Precision Twist Drill, HSS, USA | Drill Tooling and Accessories | Drill Bits | 0.8906" (57/64" x 12" FL x 18" OAL x Straight Shank | $25 EACH | 1 | 4A |
|||||||
3983 | Mfgr Unknown Twist Drill, HS, china | Drill Tooling and Accessories | Drill Bits | 0.9375" (15/16" x 12" FL x #3 MT | $30 EACH | 1 | 4A |
|||||||
3982 | Mfgr Unknown Twist Drill, HS | Drill Tooling and Accessories | Drill Bits | 0.9687" (31/32" x 11" FL x #3 MT | $25 EACH | 1 | 4A |
|||||||
3796 | Lefroge HSS twist drill bit, UNUSED | Drill Tooling and Accessories | Drill Bits | 1,5625" (1-9/16" Dia. x 17" OAL x 10" Flue with #5 Morse Taper | $125 Each | 1 | 4a |
|||||||
4095 | MICHIGAN DRILL DRILL BIT #303, SD, HSS | Drill Tooling and Accessories | Drill Bits | 1.0312" X 1/2" SHANK | $40 EACH | 1 | 004 |
|||||||
4094 | PRECISION TWIST DRILL DRILL BIT #91467-R56, SD, HSS | Drill Tooling and Accessories | Drill Bits | 1.0468" X 1/2" SHANK | $40 EACH | 1 | 004 |
|||||||
4092 | CLE-LINE DRILL BIT #C17066, SD, WITH 3 FLATS, HSS | Drill Tooling and Accessories | Drill Bits | 1.0625" X 1/2" SHANK | $40 EACH | 1 | 004 |
|||||||
4090 | MORSE DRILL BIT #15070, SD, WITH 3 FLATS, HSS | Drill Tooling and Accessories | Drill Bits | 1.0625" X 1/2" SHANK | $40 EACH | 2 | 004 |
|||||||
4073 | Mfgr Unknown Twist Drill, HSS | Drill Tooling and Accessories | Drill Bits | 1.0625" X 13" FL X #3 MT & 11/16.000" (6" X 4-1/2" X #3 MT | $20 FOR ALL | 2 | 4A |
|||||||
4100 | POLAND DRILL BIT, HSS, SD | Drill Tooling and Accessories | Drill Bits | 1.0937" X 3/4" SHANK | $40 EACH | 1 | 004 |
|||||||
4089 | MORSE DRILL BIT #15072, SD, WITH 3 FLATS | Drill Tooling and Accessories | Drill Bits | 1.1875" X 1/2" SHANK | $40 EACH | 1 | 004 |
|||||||
4093 | MFGR UNKNOWN DRILL BIT #01347731, SD, WITH 3 FLATS, HSS | Drill Tooling and Accessories | Drill Bits | 1.2187" X 1/2" SHANK | $40 EACH | 1 | 004 |
|||||||
4097 | MFGR UNKNOWN DRILL BIT, HSS, USA | Drill Tooling and Accessories | Drill Bits | 1.2812" X 3/4" SHANK | $40 EACH | 1 | 004 |
|||||||
4099 | INDIAN TOOL DRILL BIT, HSS, SD,USA | Drill Tooling and Accessories | Drill Bits | 1.5000" X 3/4" SHANK | $40 EACH | 1 | 004 |
|||||||
3749 | Red Shield USA HSS Twist Drill Bit | Drill Tooling and Accessories | Drill Bits | 1.5937" (1-19/32" x 17" OAL x 9-1/2"Flute with #5 Morse Taper | $50 Each | 1 | 4A |
|||||||
3758 | Red Shield USA HSS Twist Drill Bit | Drill Tooling and Accessories | Drill Bits | 1.6094" (1-39/64" x 17-1/4" OAL x 10"Flute with #5 Morse Taper | $50 Each | 1 | 4A |
|||||||
3809 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.6562" (1-21/32" x 17-1/4" OAL x 10" Flute with #5 Morse Taper | $125 Each | 1 | 4a |
|||||||
4072 | Mfgr Unknown Twist Drill, HSS | Drill Tooling and Accessories | Drill Bits | 1.6875" X 8" FL X #5 MT | $60 EACH | 1 | 4A |
|||||||
4071 | Mfgr Unknown Twist Drill, HSS | Drill Tooling and Accessories | Drill Bits | 1.7031" X 10" FL X #5 MT | $70 EACH | 1 | 4A |
|||||||
3748 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.7187" (1-23/32" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $50 Each | 1 | 4a |
|||||||
3762 | CLEVELAND HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.7187" (1-23/32" x 17-1/2" OAL x 9-1/2" Flute with #5 Morse Taper | $50 Each | 1 | 4a |
|||||||
3810 | UNION BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.7500" (1-3/4" x 17-1/4" OAL x 10" Flute with #5 Morse Taper | $125 Each | 1 | 4a |
|||||||
3761 | CLEVELAND HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.7812" (1-25/32" x 13" OAL x 5" Flute with #5 Morse Taper | $15 Each | 1 | 4a |
|||||||
3756 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.7812" (1-25/32" x 17-1/2" OAL x 9-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4a |
|||||||
3807 | SKF ENGLAND HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.7969" (1-51/64" x 17" OAL x 9-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4a |
|||||||
3792 | VERMONT HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.8125" (1-13/16" x 17" OAL x 10" Flute with #5 Morse Taper | $125 Each | 1 | 4a |
|||||||
3795 | VERMONT HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.8125" (1-13/16" x 17" OAL x 10" Flute with #5 Morse Taper | $150 Each | 1 | 4a |
|||||||
3759 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.8125" (1-13/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $50 Each | 1 | 4a |
|||||||
3760 | DORMER HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.8281" (1-53/64" x 17" OAL x 9-1/2" Flute with #5 Morse Taper | $50 Each | 1 | 4a |
|||||||
3753 | UNKNOWN USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.8437" (1-27/32" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $75 Each | 1 | 4a |
|||||||
3800 | UNION BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.8437" (1-27/32" x 18" OAL x 10-1/2" Flute with #5 Morse Taper | $150 Each | 1 | 4a |
|||||||
3746 | SKF ENGLAND HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.8590" (1-55/64" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $75 Each | 1 | 4a |
|||||||
3742 | UNKNOWN USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.8750" (1-7/8" x 17-3/4" OAL x 10" Flute with #5 Morse Taper | $50 Each | 1 | 4a |
|||||||
3754 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.9062" (1-29/32" x 17" OAL x 9-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4a |
|||||||
3797 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.9062" (1-29/32" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $150 Each | 1 | 4a |
|||||||
3790 | NEW YORK HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.9062" (1-29/32" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $125 Each | 1 | 4a |
|||||||
3745 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.9375" (1-15/16" x 14" OAL x 7" Flute with #5 Morse Taper | $50 Each | 1 | 4a |
|||||||
3808 | VERMONT HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.9375" (1-15/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $175 Each | 1 | 4a |
|||||||
3757 | UNKNOWN USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.9531" (1-61/64" x 16-3/4" OAL x 9" Flute with #5 Morse Taper | $75 Each | 1 | 4a |
|||||||
3755 | NEW YORK HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.9687" (1-31/32" x 16-1/2" OAL x 9" Flute with #5 Morse Taper | $75 Each | 1 | 4a |
|||||||
3791 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 1.9687" (1-31/32" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $125 Each | 1 | 4A |
|||||||
3744 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 1.9844" (1-63/64" X 15" OAL x 7" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
1727 | MSC Brand twist drill, 10-3/4" flute lngth, #5 morse taper, HSS lack finish, #2" 5MT 118D, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.000" | $175 EACH | 1 | 4A |
|||||||
3803 | UNION BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.000" (2" x 19" OAL x 10" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3806 | NEW YORK HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.0165" (2-1/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $150 Each | 1 | 4A |
|||||||
3768 | NEW YORK HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.0312" (2-1/32" X 17-1/2" OAL X 10" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3794 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.0625" (2-1/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
3747 | NEW YORK HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.1250" (2-1/8" x 16" OAL x 8-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3799 | VERMONT HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.1250" (2-1/8" x 18" OAL x 10-1/2" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3770 | NEW YORK HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.1875" (2-3/16" x 14" OAL x 6-1/2" Flute with #5 Morse Taper | $50 Each | 1 | 4A |
|||||||
3789 | LEFORGE HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.1875" (2-3/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $125 Each | 1 | 4A |
|||||||
3793 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.1875" (2-3/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
3752 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.1875" (2-3/16" x 17-3/4" OAL x 10" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3764 | NEW YORK HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.2187" (2-7/32" x 16-1/2" OAL x 9" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
3805 | LEFORGE HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.2187" (2-7/32" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3801 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.2500" (2-1/4" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $200 Each | 1 | 4A |
|||||||
3771 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.3125" (2-5/16" x 16" OAL x 8-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3788 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.3125" (2-5/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $125 Each | 1 | 4A |
|||||||
3802 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.3125" (2-5/16" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3763 | CLEVELAND HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.3437" (2-11/32" x 15-1/2" OAL x 8" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3741 | UNKNOWN USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.3750" (2-3/8" X 16" OAL x 8-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3798 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.3750" (2-3/8" x 18" OAL x 10-1/2" Flute with #5 Morse Taper | $200 Each | 1 | 4A |
|||||||
3774 | CLEVELAND HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.4062" (2-13/32" x 19" OAL x 10-1/2" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
3751 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.4375" (2-7/16" x 17" OAL x 8-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3804 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.4375" (2-7/16" x 17-1/2" OAL x 10-1/2" Flute with #5 Morse Taper | $200 Each | 1 | 4A |
|||||||
3743 | UNKNOWN USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.5000" (2-1/2" x 17-1/2" OAL x 10" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
3775 | LATROBE HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.5312" (2-17/32" x 17-3/4" OAL x 8-1/2" Flute with #5 Morse Taper | $75 Each | 1 | 4A |
|||||||
3772 | RED SHIELD USA HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.5312" (2-17/32" x 19" OAL x 11" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
3767 | NEW YORK HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.6250" (2-5/8" x 16-3/4" OAL x 9" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
3784 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.6250" (2-5/8" x 19-1/2" OAL x 11-1/2" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3778 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.6250" (2-5/8" x 20" OAL x 12" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3779 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.6250" (2-5/8" x 20" OAL x 12" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3776 | CHINA HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.6875" (2-11/16" x 20-1/4" OAL x 12" Flute with #5 Morse Taper | $200 Each | 1 | 4A |
|||||||
3785 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.6875" (2-11/16" x 20-3/4" OAL x 12" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3777 | VERMONT HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.7500" (2-3/4" x 20-1/2" OAL x 12-1/2" Flute with #5 Morse Taper | $200 Each | 1 | 4A |
|||||||
3781 | NEW YORK HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.8125" (2-13/16" x 20-3/4" OAL x 13" Flute with #5 Morse Taper | $200 Each | 1 | 4A |
|||||||
3787 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.8125" (2-13/16" X 21" OAL x 13" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3765 | BUTTERFIELD HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 2.8750" (2-7/8" x 20" OAL x 12" Flute with #5 Morse Taper | $150 Each | 1 | 4A |
|||||||
3786 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.8750" (2-7/8" x 21" OAL x 13" Flute with #5 Morse Taper | $175 Each | 1 | 4A |
|||||||
3783 | BUTTERFIELD HSS TWIST DRILL BIT, UNUSED | Drill Tooling and Accessories | Drill Bits | 2.9375" (2-15/16" x 22" OAL x 13-1/2" Flute with #5 Morse Taper | $250 Each | 1 | 4A |
|||||||
3766 | BUTTERFIELD HSS TWIST DRILL BIT | Drill Tooling and Accessories | Drill Bits | 3.0000" (3" x 13" OAL x 5" Flute with #5 Morse Taper | $100 Each | 1 | 4A |
|||||||
4200 | (2) Rohm (1) Taiwan key type drill chucks with (1) key | Drill Tooling and Accessories | Drill Chucks | Rohm 1/32" to 1/2" x #2 morse taper. Rohm 1/32" to 5/8" x #3 morse taper' Taiwan 1/16" to 1/2" x #2 Morse taper with 2-3 MT sleeve. | $50 FOR ALL | 3 | 008 |
|||||||
4445 | Huot Drill Box #13025, Drills, Wire Gauge.
Box only no contents. | Drill Tooling and Accessories | Miscellaneous | $100 EACH | 1 | 2A |
||||||||
4446 | Huot Drill Box #13050, Drills, Letter.
Box only no contents. | Drill Tooling and Accessories | Miscellaneous | $100 EACH | 1 | 2A |
||||||||
3230 | Mccrosky tool co wizard quick chjange tool holder, holder only | Drill Tooling and Accessories | Tool Holder | C-5, uses 1.775" dia x 3" long straight body tool holder with 2 ears, x #5 morse taper | $25 Each | 1 | 019 |
|||||||
3892 | Balancing Arbor for grinding wheel | Grinder Tooling and Accessories | Arbors | Taper Dia. 1.460" / 1.780" x taper length 1.570" x shaft dia. 1.260" x OAL 9.750" | $45 Each | 1 | 05 |
|||||||
3889 | Balancing Arbor for Grinding Wheel | Grinder Tooling and Accessories | Arbors | Taper Dia. 1.500" / 1.700" x taper length 1.50" x shaft dia. 0.850" x OAL 10.750" | $45 Each | 1 | 05 |
|||||||
3890 | Balancing Arbor for Grinding Wheel | Grinder Tooling and Accessories | Arbors | Taper Dia. 1.700" / 2.250" x taper length 2.750" x shaft dia. 1.280" x OAL 10.500" | $55 Each | 1 | 05 |
|||||||
1479 | Mfg'r unknown face plate for cylindrical grinder | Grinder Tooling and Accessories | Face Plates | 10" dia face with 7 3/8" dia mounting face with 4 1/2" thru holes | $20 Each | 1 | CHUCK RACK |
|||||||
4333 | Mfgr Unknwon electro magnetic chuck with Magnetool Inc control. Wired for single phase 110 volt input. Laminations run 24" length, 1/8" appart. 150 Watt control output, controls: On-residaul(off)-release. | Grinder Tooling and Accessories | Magnetic Chucks | 10" x 24" x 2 7/8" high | $1250 EACH | 1 | 12F |
|||||||
1023 | Name unknown grinding wheel adaptor | Grinder Tooling and Accessories | Miscellaneous | $100 EACH | 1 | 005 |
||||||||
1024 | Name unknown grinding wheel adaptor | Grinder Tooling and Accessories | Miscellaneous | $100 EACH | 1 | 005 |
||||||||
3914 | Jones Shipman grinding wheel hubs, for spindles with cross pin slot, have adjsutable weight balance weights | Grinder Tooling and Accessories | Wheel Hub | For 3" bore wheels, 4-1/2" OD hub, 1-14" max. wheel thickness | $175 Each | 4 | 05 |
|||||||
1937 | Parlec tool presetter adapter P50 to 30VDI | Inspection Items | Miscellaneous | P50-30DVI, Z=2.1440, -54.458mm, A2492 | $20 Each | 1 | 020 |
|||||||
4323 | Moore & Wright ground face V blocks, 1 set #216 | Inspection Items | V Blocks | 74 x 224 x 164 mm | $395 FOR ALL | 2 | CHUCK RACK |
|||||||
4299 | Landis Threading Chaser Holders, # B90188, 6-3/4 Degree, 3/8" dia, 1/16P-1/8 LD, Left Hand, 3 pieces without screws and clamps | Landis Threader Tooling | Landis Chaser Holders | 0.375 | $30 FOR ALL | 4 | 006 |
|||||||
4282 | Landis Threading Chaser Holders, #B3405, 7/16 to 5/8 UNC | Landis Threader Tooling | Landis Chaser Holders | .437-.625 | $20 EACH | 42 | 006 |
|||||||
4296 | Landis Threading Chaser Holders, # B3535, 3/16 to 3/8 NF Right Hand | Landis Threader Tooling | Landis Chaser Holders | 0.187 to 0.375 | $50 FOR ALL | 4 | 006 |
|||||||
4290 | Landis Threading Chaser Holders, # BA15058, 3/16 to 3/8 UNC | Landis Threader Tooling | Landis Chaser Holders | 0.187 to 0.375 | $75 FOR ALL | 4 | 006 |
|||||||
4298 | Landis Threading Chaser Holders, # CA3549, 3/16 to 3/8 UNC Left Hand, 3 pieces without screws and clamps | Landis Threader Tooling | Landis Chaser Holders | 0.187 to 0.375 | $30 FOR ALL | 4 | 006 |
|||||||
4288 | Landis Threading Chaser Holders, # Unknown, 3/16 to 3/8 NC | Landis Threader Tooling | Landis Chaser Holders | 0.187 to 0.375 | $50 FOR ALL | 4 | 006 |
|||||||
4285 | Landis Threading Chaser Holders, # unknown, 3/16 to 3/8 UNF, screw broken off in 1 piece | Landis Threader Tooling | Landis Chaser Holders | 0.187 to 0.375 | $75 FOR ALL | 1 | 006 |
|||||||
4284 | Landis Threading Chaser Holders, #BA15566, 3/16 to 3/8 UNC | Landis Threader Tooling | Landis Chaser Holders | 0.187 to 0.375 | $15 EACH | 36 | 006 |
|||||||
4287 | Landis Threading Chaser Holders, # Unknown, #4 to #12 NF | Landis Threader Tooling | Landis Chaser Holders | 0.204 to 0.189 | $50 FOR ALL | 4 | 006 |
|||||||
4295 | Landis Threading Chaser Holders, # B3310, 7/16 to 5/8 UNC | Landis Threader Tooling | Landis Chaser Holders | 0.437 to 0.625 | $20 EACH | 23 | 006 |
|||||||
4293 | Landis Threading Chaser Holders, # B3406, 7/16 to 5/8 NF, 1 piece has a broken screw | Landis Threader Tooling | Landis Chaser Holders | 0.437 to 0.625 | $75 FOR ALL | 4 | 006 |
|||||||
4297 | Landis Threading Chaser Holders, # B3535, 7/16 to 5/8 UNC Left Hand | Landis Threader Tooling | Landis Chaser Holders | 0.437 to 0.625 | $60 FOR ALL | 4 | 006 |
|||||||
4289 | Landis Threading Chaser Holders, # Unknown, 7/16 to 5/8 UNC | Landis Threader Tooling | Landis Chaser Holders | 0.437 to 0.625 | $25 EACH | 8 | 006 |
|||||||
4283 | Landis Threading Chaser Holders, #B3410, 7/16 to 5/8 UNC | Landis Threader Tooling | Landis Chaser Holders | 0.437 to 0.625 | $20 EACH | 36 | 006 |
|||||||
4292 | Landis Threading Chaser Holders, # B3406, 7/16 to 5/8 UNC & 1/4 Pipe | Landis Threader Tooling | Landis Chaser Holders | 0.437 to 0.625 & 1/4 pipe | $20 EACH | 8 | 006 |
|||||||
4286 | Landis Threading Chaser Holders, # unknown, 5/8 - 18 PT, pipe thread | Landis Threader Tooling | Landis Chaser Holders | 0.625 | $75 FOR ALL | 4 | 006 |
|||||||
4291 | Landis Threading Chaser Holders, # B3411, 11/16 to 7/8 UNF | Landis Threader Tooling | Landis Chaser Holders | 0.687 to 0.875 | $75 FOR ALL | 4 | 006 |
|||||||
4294 | Landis Threading Chaser Holders, # unknown, 1-1/4 Degree | Landis Threader Tooling | Landis Chaser Holders | 1.250 degree | $25 FOR ALL | 4 | 006 |
|||||||
4239 | Landis Tangential chashers, 1 set, UNUSED | Landis Threader Tooling | Landis Tangential Chasers | 10UN | $85 FOR ALL | 4 | 006 |
|||||||
4220 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 10UN | $55 FOR ALL | 4 | 006 |
|||||||
4227 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 10UN | $55 FOR ALL | 4 | 006 |
|||||||
4241 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 10UN | $55 FOR ALL | 4 | 006 |
|||||||
4251 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 11UN | $55 FOR ALL | 4 | 006 |
|||||||
4265 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 12UN | $55 FOR ALL | 4 | 006 |
|||||||
4214 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 12UN | $55 FOR ALL | 4 | 006 |
|||||||
4278 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 12UN-G | $30 FOR ALL | 3 | 006 |
|||||||
4246 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 13UN | $55 FOR ALL | 4 | 006 |
|||||||
4262 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 13UN | $55 FOR ALL | 4 | 006 |
|||||||
4264 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 13UN | $55 FOR ALL | 4 | 006 |
|||||||
4266 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 16P UN | $55 FOR ALL | 4 | 006 |
|||||||
4267 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 16UN | $55 FOR ALL | 4 | 006 |
|||||||
4270 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18NPT | $55 FOR ALL | 4 | 006 |
|||||||
4269 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18P-5/8 | $55 FOR ALL | 4 | 006 |
|||||||
4271 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18P-5/8 | $55 FOR ALL | 4 | 006 |
|||||||
4272 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18P-5/8 | $55 FOR ALL | 4 | 006 |
|||||||
4218 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18P-5/8 | $55 FOR ALL | 4 | 006 |
|||||||
4257 | Landis Tangential chashers, 1 set, UNUSED | Landis Threader Tooling | Landis Tangential Chasers | 18UN | $85 FOR ALL | 4 | 006 |
|||||||
4273 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18UN | $55 FOR ALL | 4 | 006 |
|||||||
4274 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18UN | $30 FOR ALL | 3 | 006 |
|||||||
4275 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18UN | $55 FOR ALL | 4 | 006 |
|||||||
4276 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18UN | $55 FOR ALL | 4 | 006 |
|||||||
4277 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18UN | $55 FOR ALL | 4 | 006 |
|||||||
4279 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18UN | $55 FOR ALL | 4 | 006 |
|||||||
4281 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 18UN-G | $55 FOR ALL | 4 | 006 |
|||||||
4280 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 20UN | $55 FOR ALL | 4 | 006 |
|||||||
4322 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 20UN-G | $85 FOR ALL | 4 | 006 |
|||||||
4215 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 6UN | $55 FOR ALL | 4 | 006 |
|||||||
4216 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 6UN | $40 FOR ALL | 4 | 006 |
|||||||
4219 | Landis Tangential chashers, 1 set, (1) thread on 1 chaser is broke part way | Landis Threader Tooling | Landis Tangential Chasers | 7UN | $50 FOR ALL | 4 | 006 |
|||||||
4258 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 7UN | $55 FOR ALL | 4 | 006 |
|||||||
4217 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 7UN | $55 FOR ALL | 4 | 006 |
|||||||
4224 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 8UN | $55 FOR ALL | 4 | 006 |
|||||||
4225 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 8UN | $55 FOR ALL | 4 | 006 |
|||||||
4259 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 8UN-G | $55 FOR ALL | 4 | 006 |
|||||||
4221 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 9UN | $55 FOR ALL | 4 | 006 |
|||||||
4233 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 9UN | $55 FOR ALL | 4 | 006 |
|||||||
4234 | Landis Tangential chashers, 1 set | Landis Threader Tooling | Landis Tangential Chasers | 9UN | $55 FOR ALL | 4 | 006 |
|||||||
4448 | Hardinge Cross Slide 2 Axis, model DSA.
| Lathe Tooling and Accessories | Attachments | $495 EACH | 1 | 2A |
||||||||
4449 | Hardinge Cross Slide 2 Axis, model DSA.
| Lathe Tooling and Accessories | Attachments | $295 EACH | 1 | 2A |
||||||||
4447 | Palmgren #250 lathe milling attachment vise.
| Lathe Tooling and Accessories | Attachments | 2-1/2" jaw width | $275 EACH | 1 | 2A |
|||||||
4026 | BISON LATHE DEAD CENTER, CARBIDE TIPPED, 60 DEGREE, UNUSED | Lathe Tooling and Accessories | Centers | #6 MORSE TAPER | $65 EACH | 1 | 023 |
|||||||
3909 | Lathe headstock reducer bushing with dead center, UNUSED | Lathe Tooling and Accessories | Centers | Bushing: 2.770" large end x 2.575" small end x 4-1/4" long with #4 morse taper center | $75 Each | Set | chuck rack |
|||||||
3910 | Lathe headstock reducer bushing with dead center, UNUSED | Lathe Tooling and Accessories | Centers | Bushing: 2.770" large end x 2.575" small end x 4-1/4" long with #5 morse taper center | $75 Each | Set | chuck rack |
|||||||
3908 | Lathe headstock reducer bushing with dead center, UNUSED | Lathe Tooling and Accessories | Centers | Bushing: 3.490" large end x 3.210" small end x 4-1/4" long with #4 morse taper center | $75 Each | Set | chuck rack |
|||||||
4373 | OD chuck jaws for a 6 jaw chuck, Mfg Unknown, overall jaw length 4-1/4", height 3" top to bottom of scroll teeth, overall width 1.483", slot size on ecah side 0.493" wide, wed thickness at side slots 0.845".
ALL DIMENSIONS ARE APPROXIMATE | Lathe Tooling and Accessories | Chuck Jaws | $75 FOR ALL | LOT | 010 |
||||||||
4107 | MONSTER ALUMINUM PIE JAWS SET, PN: FTG8-2A, 3 PIECE SET, UNUSED | Lathe Tooling and Accessories | Chuck Jaws | 08" X 2" HIGH | $75 EACH | 1 | 004 |
|||||||
4370 | Mfg Unknown lathe drive plate, D6 camlock backing with (2) D6 pins. | Lathe Tooling and Accessories | Drive Plate | 10" Diameter | $ EACH | 1 | CHUCH RACK |
|||||||
4194 | Mfgr unknown lathe drive plate, D6 camlock mount | Lathe Tooling and Accessories | Drive Plate | D6 camlock, 8-5/8" diameter, 2-3/8" plate thickness with 4" thru hole | $50 EACH | 1 | CHUCK RACK |
|||||||
0185 | 22" Face plate L2 mount | Lathe Tooling and Accessories | Face Plates | 22" | $25 EACH | 1 | CHUCK RACK |
|||||||
0186 | 24" Face plate L2 mount | Lathe Tooling and Accessories | Face Plates | 24" | $25 EACH | 1 | CHUCK RACK |
|||||||
3354 | Lathe adapter plate, mfgr unknown, l2 mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 07" dia x L2 | $25 Each | 1 | CHUCK RACK |
|||||||
1477 | Drive plate, mfgr unknown, d6 camlock mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 09" | $10 Each | 1 | CHUCK RACK |
|||||||
3352 | Drive plate, mfgr unknown, with 11.82" plated bolted to it, used as a chuck adapter plate for L2 mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 10" dia x L2 | $25 Each | 1 | CHUCK RACK |
|||||||
3345 | Face plate, mfgr unknown, A6 mount | Lathe Tooling and Accessories | Lathe Chuck Drive and Backing Plates | 24" dia | $35 Each | 1 | CHUCK RACK |
|||||||
2326 | Bison 3 Jaw Self-Centering chuck, Plain back, 2 piece reversible Jaws | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 06" | $200 Each | 1 | CHUCK RACK |
|||||||
4331 | Buck 4 Jaw Chuck #1306 with 1 piece OD/ID chuck jaws. | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 06" bBody Dia. X 2-5/8" Thick with 1-1/2" thru hole with 3.090" dia. X 5/8" deep mounting bore and 4 thru holes for adapter plate. | $250 EACH | 1 | CHUCK RACK |
|||||||
4332 | Buck 6 Jaw adjusta tru Chuck #8662 with 1 piece OD/ID chuck jaws and an addition set of OD only jaws and chuck wrench. | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 06" Dia. X 2-5/16" thich body, plain back, no mounting plate supplied. | $500 EACH | 1 | CHUCK RACK |
|||||||
4330 | Mfg Unknown 3 Jaw Chuck with 1 piece OD/ID chuck jaws and extra set of OG only jaws and wrench. D-4 Camlock mount using a replaceable back plate. | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 06-1/4" Body Dia, 2-3/4" thick with 1-5/8" thru hole | $250 EACH | 1 | CHUCK RACK |
|||||||
3337 | 3 jaw chuck, mfgr unknown, plain back with adjusta tru design, one piece solid hard jaws for OD chucking only | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 07.5" | $75 Each | 1 | CHUCK RACK |
|||||||
3336 | Buck 3 jaw chuck, has master jaws, top jaws missing, plain back with adjusta tru design, no adapter plate | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 07.5" | $75 Each | 1 | CHUCK RACK |
|||||||
3915 | Cushman 3 jaw lathe chuck, #10-164-08-000-A / M2 with 2 piece jaws with hard reversible top jaws, plain back with adjusta tru mount design | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 08" | $100 Each | 1 | chuck rack |
|||||||
4441 | SMW AutoBlok 3 jaw hydraulic lathe chuck with draw tube, #3113, KNCS-N-260-72, Germany, 4700 max rpm, F=70 KN, 5" body thickness, 2-7/8" thru hole, 42-3/8" long tube with 3.460" ID theads on each end, 3.170" ID, NO actuator NO top jaws.
| Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 10" | $1250 EACH | 1 | 012 |
|||||||
4121 | Bison 3 Jaw Chuck with D8 camlock mount, 2 piece bolt on hard reversible chuck jaws, note: one chuck wrench scew is cracked but functional. 3" thru hole | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 10" | $200 EACH | 1 | Chuck Rack |
|||||||
3341 | Buck 3 jaw chuck, no master or top jaws, adjusta tru design with bolt on adapter plate for D8 camlock | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 10" | $25 Each | 1 | CHUCK RACK |
|||||||
1293 | Lathe Chuck, Model PUUm-m10/D5 ZD, S/N 2316, 3 Jaw, Self Centering, D 5 Mount | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 10" | $100 Each | 1 | CHUCK RACK |
|||||||
4443 | Mfgr Unknown, 3 jaw hydraulic lathe chuck, #Za8-12-93B/40093. 4" chuck thru hole, 3000 max rpm, 4" chuck thru hole, fine serrated master jaws, NO top jaws, No actuator , front insert piece w/ tapped holes, black ring collar and spanner wrench, A8 mount.
| Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 12" | $950 EACH | 1 | 012 |
|||||||
4442 | SMW 3 jaw hydraulic lathe chuck #THW-B-315-86, F= max. 900 dan, max 19840 lbs., max rpm 2800, (3) fine serated master jaws, (3) key mount master jaws, NO top jaws, 3-7/16" thru hole, 3.960" ID thread draw tube connector, A8 mount, Germany, 2/15/23 was taken apart and cleaned checked and lubed.
| Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 12" | $1500 EACH | 1 | 012 |
|||||||
4444 | S-P 3 jaw hydraulic lathe chuck, sn. 12-52C-320, 1-5/8" hole thru, coarse serrated master jaws, NO top jaws, No tube or actuator, A8 mount.
| Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 12" | $950 EACH | 1 | 012 |
|||||||
3436 | Skandinaviska 3 jsaw (Sweden) chuck, type GS15-3, N-414847, 4-3/4" thru hole, plain back adjusta tru design, back recess 1-1/8" deep x 11-3/4" dia. with 7 adjuster holes, only have 2 adjuster screws, (6) thru holes for 5/8" cap screws. | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 15" | $750 EACH | 1 | CHUCK RACK |
|||||||
4393 | Giddings & Lewis 3 jaw power chuck, serial no. 050-4130-93, no chuck jaws, for a G&L cnc VTL with autmatic chuck changer system. | Lathe Tooling and Accessories | Lathe Chucks 3 Jaw | 48" | $ EACH | 1 | Floor |
|||||||
1020 | Whiton 4 Jaw Chuck | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 07.5" | $75 EACH | 1 | CHUCK RACK |
|||||||
3339 | 4 Jaw chuck, mfgr unknown, 1 piece hard reversible jaws, plain back, no adapter | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 08" | $100 Each | 1 | CHUCK RACK |
|||||||
2327 | Bison 4 Jaw Chuck, Hard solid reversible jaws, cast iron body, A-6 mountUNUSED | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 08" | $250 Each | 1 | CHUCK RACK |
|||||||
4437 | Buck 4 jaw lathe chuck, #1312, 3-3/4" Body depth, 1 piece hard reversible jaws, 3-1/2" thru hole, D6 camlock adapter plate mount 7.850" +/- dia. bolted to chuck. https://www.hildebrandmachinery.com/tooling/4437-1.jpg | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 12" | $500 EACH | 1 | CHUCK RACK |
|||||||
3351 | Cushman 4 jaw chuck #4700112l01a-3F, 3" thru hole with 1 piece solid hard reversible jaws, L1 mount | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 12" | $200 Each | 1 | CHUCK RACK |
|||||||
3872 | Lathe chuck, 4 jaw, mfgr unknown, 3" thru hole, 3-7/8" thick body, D8 camlock mount BUT NO PINS | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 12" | $120 Each | 1 | CHUCK RACK |
|||||||
1632 | No Name 4 Jaw Chuck (missing camlock pins) | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 12" | $250 EACH | 1 | CHUCK RACK |
|||||||
3873 | Warner Swasey 4 jaw chuck with 2 piece chuck jaws with hard reversible top jaws, ASA1-11 mount, 5-1/2" thick body | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 12" | $175 Each | 1 | CHUCK RACK |
|||||||
4439 | Skinner 4 jaw lathe chuck #1918-D6-56, 1 piece hard reversible jaws, 3-1/2" thru hole, D6 camlock mount buil in.
| Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 18" | $450 EACH | 1 | CHUCK RACK |
|||||||
3947 | LATHE CHUCK, MFGR UNKNOWN, D6 CAMLOCK MOUNT | Lathe Tooling and Accessories | Lathe Chucks 4 Jaw | 18" | $250 EACH | 1 | chuck rack |
|||||||
3340 | Buck 6 jaw adjusta Tru chuck, 6 jaw, (3) master jaws missing, no top jaws with 8" dia. D6 camlock Adapter plate | Lathe Tooling and Accessories | Lathe Chucks 6 Jaw | 08" | $75 EACH | 1 | CHUCK RACK |
|||||||
3427 | Bison set tru 6 jaw lathe chuck, #3865012-1/2, 1087-97, plain back with hard master jaws with (cut)soft top jaws (no hard top jaws) and wrench, " thru hole, 7" dia. X 3/4" deep mount for adapter plate, no adapter provided | Lathe Tooling and Accessories | Lathe Chucks 6 Jaw | 12.5" | $750 EACH | 1 | CHUCK RACK |
|||||||
0191 | 12" 3 jaw power chuck Unknown name, A series mount | Lathe Tooling and Accessories | Lathe Chucks Air and Hydraulic | 12" | $150 EACH | 1 | chuck rack |
|||||||
2206 | Lathe chuck backing plate, mfg. unknown | Lathe Tooling and Accessories | Miscellaneous | 8 1/16" OD with 4" ID x 7/8" thick, D6 camlock | $20 EACH | 1 | CHUCK RACK |
|||||||
4209 | Mfgr unknown lathe carriage stop, micrometer adjustable | Lathe Tooling and Accessories | Other | 1-1/4" wide V | $25 EACH | 1 | 4A |
|||||||
3864 | Follow rest, mfgr unknown, replaceable bronze contact tips, distance between nounting holes 12-3/4" | Lathe Tooling and Accessories | Steady Rest | $150 Each | 1 | chuck rack |
||||||||
1611 | Follower Rest (fits a 20" American Engine Lathe) | Lathe Tooling and Accessories | Steady Rest | $100 EACH | 1 | CHUCK RACK |
||||||||
3332 | STEADY REST, MFGR UNKNOWN, 3 1/2", CAPACITY, flat way to centerline 7 1/4" | Lathe Tooling and Accessories | Steady Rest | 03.5" | $75 Each | 1 | CHUCK RACK |
|||||||
3331 | steady rest, mfgr unknown, bronze tips | Lathe Tooling and Accessories | Steady Rest | 04.5" | $100 Each | 1 | CHUCK RACK |
|||||||
3390 | Lathe Steady Rest, mfgr unknown with solid brass support tips | Lathe Tooling and Accessories | Steady Rest | 05" dia. X 7-1/4" flat way to CL | $100 EACH | 1 | CHUCK RACK |
|||||||
1335 | Steady rest, mfgr unknown, 6" capacity, solid supports, 8-3/4" flat way to centerline | Lathe Tooling and Accessories | Steady Rest | 06" | $100 Each | 1 | CHUCK RACK |
|||||||
3869 | Steady rest with replaceable bronze support tips, CL of V to CL of flat way 9-1/4" no base clamp | Lathe Tooling and Accessories | Steady Rest | 08" | $100 Each | 1 | CHUCK RACK |
|||||||
1610 | Solid bushing steady rest (fits a 20" American Engine Lathe) | Lathe Tooling and Accessories | Steady Rest | 08" hole | $150 EACH | 1 | CHUCK RACK |
|||||||
1994 | Follower Rest For Engine Lathe | Lathe Tooling and Accessories | Steady Rest | 19 1/2" Bolt mount | $250 EACH | 1 | chuck rack |
|||||||
4337 | Clausing Colchester roller type steady rest, complete, (3) Rller bearing supports with bed clamp. | Lathe Tooling and Accessories | Steady Rest | 9" capacity | $1250 EACH | 1 | CHUCK RACK |
|||||||
4336 | Tailstock from a 17" Clausing Colchester engine lathe. #5 Morse taper, 8-1/4" quill travel, 2.940" quill dia., Inch -Metric qull graduations, (2) bed clamps with bolts. | Lathe Tooling and Accessories | Tailstock | Base size: 8" x 12", center of V way to center of flat way 6-1/2" | $1250 EACH | 1 | 14F |
|||||||
2308 | Haas I.D. turning Holder off of SL-20 | Lathe Tooling and Accessories | Tool Holder | 1 1/2" | $25 Each | 2 | 019 |
|||||||
2310 | Haas I.D. Turning Holder Off of SL-20 | Lathe Tooling and Accessories | Tool Holder | 1 1/2" | $25 Each | 1 | 019 |
|||||||
2311 | Haas I.D. Turning Holder Off of SL-20 | Lathe Tooling and Accessories | Tool Holder | 1 1/4" I.D. | $25 Each | 1 | 019 |
|||||||
2312 | Haas Face/Turn Tool Holder | Lathe Tooling and Accessories | Tool Holder | 1" | $25 Each | 2 | 019 |
|||||||
2309 | Haas I.D. turning holder off of SL-20 | Lathe Tooling and Accessories | Tool Holder | 1" | $25 Each | 3 | 019 |
|||||||
3398 | Dorian lathe tool holder, insert type, #nsl20-3d, left hand, uses TopNotch NG-3l inserts, items is as new unused | Lathe Tooling and Accessories | Tool Holder | 1-1/4" x 1-1/4" x 6" OAL | $25 EACH | 1 | 005 |
|||||||
4061 | Aloris tool holder, AT71-1 | Lathe Tooling and Accessories | Tool Holder | AT71-1 cutoff | $100 EACH | 1 | 004 |
|||||||
4066 | Aloris tool holder, C16N | Lathe Tooling and Accessories | Tool Holder | C16N | $50 EACH | 1 | 004 |
|||||||
4065 | Aloris tool holder, CA4 | Lathe Tooling and Accessories | Tool Holder | CA4 | $50 EACH | 1 | 004 |
|||||||
4062 | Aloris tool holder, CA41 | Lathe Tooling and Accessories | Tool Holder | CA41 | $100 EACH | 1 | 004 |
|||||||
4177 | Aloris tool holders, #CA41 boring bar tool holders. | Lathe Tooling and Accessories | Tool Holder | CA41 | $50 EACH | 2 | 3A |
|||||||
4064 | Aloris tool holder, CA4D | Lathe Tooling and Accessories | Tool Holder | CA4D | $50 EACH | 1 | 004 |
|||||||
4059 | Aloris tool holder, CA5 | Lathe Tooling and Accessories | Tool Holder | CA5 morse taper | $80 EACH | 1 | 004 |
|||||||
3900 | Sandvik Coromant carbide insert lathe tool holders, #PTTNR 3225P 22, T Max P, each is in excellent condition. | Lathe Tooling and Accessories | Tool Holder | shank size 1" Wx 1-1/4" x 5-1/2" long, 3-/4" triangle insert | $50 Each | 1 | 05 |
|||||||
3896 | Sandvik Coromant carbide insert lathe tool holders, #MSSNL-4040S-25, T Max P, each is in excellent condition, minor rust spots from being in the cardboard box. | Lathe Tooling and Accessories | Tool Holder | shank size 1-1/2" x 1-1/2" x 8" long, 1" square insert | $50 Each | 2 | 05 |
|||||||
3895 | Sandvik Coromant carbide insert lathe tool holders, #MSSNR-4040S-25, T Max P, each is in excellent condition, minor rust spots from being in the cardboard box. | Lathe Tooling and Accessories | Tool Holder | shank size 1-1/2" x 1-1/2" x 8" long, 1" square insert | $50 Each | 2 | 05 |
|||||||
3898 | Sandvik Coromant carbide insert lathe tool holders, #PTFNR 24-5, T Max, each is in excellent condition, minor rust spots from being in the cardboard box. | Lathe Tooling and Accessories | Tool Holder | shank size 1-1/2" x 1-1/2" x 8-1/2" long, 1" triangle insert | $50 Each | 1 | 05 |
|||||||
3897 | Sandvik Coromant carbide insert lathe tool holders, #PTFNR 24-5, T Max, each is in excellent condition, minor rust spots from being in the cardboard box. | Lathe Tooling and Accessories | Tool Holder | shank size 1-1/2" x 1-1/2" x 8-1/2" long, 1" triangle insert | $50 Each | 2 | 05 |
|||||||
3899 | Sandvik Coromant carbide insert lathe tool holders, #PSSNL-20-6, L181.3-3232-19, T Max P, each is in excellent condition, minor rust spots from being in the cardboard box. | Lathe Tooling and Accessories | Tool Holder | shank size 1-1/4" x 1-1/4" x 5-1/2" long, 3-/4" square insert | $50 Each | 1 | 05 |
|||||||
0506 | POLAND STUB ARBOR WITH SPACERS, UNUSED | Mill Tooling and Accessories | Arbors | 1.250" DIA. X 2.500" LONG TOOL AREA, 1.250" DIA SHANK | $50 Each | 1 | 005 |
|||||||
4369 | Mfgr Unknown R8 taper stub arbor with (1) 1/2" & (1) 1" long bushings, nut and 2-1/2" dia x 3/4" wide radius cutter and package of DE-Staco arbor spacers. | Mill Tooling and Accessories | Arbors | R8 taper | $ EACH | 1 | 009 |
|||||||
3841 | Right angle milling attachment, mount face unknown, spindle taper #40 NST, with manual draw bar, spline shaft drive, no drive tool or gear. | Mill Tooling and Accessories | Attachments | 13" reach | $350 Each | 1 | 12F |
|||||||
2903 | Kennemetal #KM63UTS63120 4.759" Extension, UNUSED | Mill Tooling and Accessories | Collet Chucks | 4.724" Ext. x 6.29" OAL x 2.48" Dia | $75 Each | 1 | 019 |
|||||||
2900 | Kennametal #HSK100AKM63115M Collet Chucks, UNUSED | Mill Tooling and Accessories | Collet Chucks | HSK100 | $75 Each | 5 | 019 |
|||||||
2901 | Kennametal #HSK100AKM63115M with KM63UTS63120 | Mill Tooling and Accessories | Collet Chucks | HSK100 with 4.724" Extension | $75 Each | 1 | 019 |
|||||||
4404 | Valenite chamfer insert milling cutters, #QDT01102-01, RF699100 / 10T02 / 11-72517-06, shank size 3/4" dia, x 2" long, thru coolant type, (2) used and (3) UNUSED | Mill Tooling and Accessories | Cutters | ? | $45 EACH | 2 | 009 |
|||||||
4431 | Carb Alloy milling cutter, slot type, 18 position insert type, 2" Dia bore, #335.18-10.00-039-20-18, (1) used & (1) UNUSED | Mill Tooling and Accessories | Cutters | 0.39" - 0.47" wide x 10" dia. | $450 EACH | 2 | 009 |
|||||||
4430 | Carb Alloy milling cutter, slot type, 16 position insert type, 2" Dia bore, #335.18-08.00-039-20-16, (1) used & (1) UNUSED | Mill Tooling and Accessories | Cutters | 0.39" - 0.47" wide x 8" dia. | $400 EACH | 2 | 009 |
|||||||
4382 | Valenite milling cutters, 2 flute, insert type, #539.63.206, Shank size 3/4" dia x 2" long, (1) is usd, (1) is UNUSED | Mill Tooling and Accessories | Cutters | 0.750" dia x 1-3/8" long | $55 EACH | 2 | 009 |
|||||||
4378 | Valenite milling cutter, inert type, #S-VMSP-075R1, mini mills ® #PT-317T 9T02, Shank size 3/4" x 2" long, 3" OAL. | Mill Tooling and Accessories | Cutters | 0.750" Dia.x 1" Long | $25 EACH | 2 | 009 |
|||||||
4406 | Valenite Centre-Dex endmill, #S-VMSP-112R-90CCC, 2 flute, coolant thru, shank size 3/4" x 2" long. OAL 3-1/4", ALLARE UNUSED | Mill Tooling and Accessories | Cutters | 0.935" Dia. | $90 EACH | 3 | 009 |
|||||||
4400 | Valenite Centre-Dex endmill, #S-VMSP-112R-90CCC, 2 flute, coolant thru, shank size 3/4" x 2" long. OAL 3-1/4". | Mill Tooling and Accessories | Cutters | 0.935" Dia. | $45 EACH | 1 | 009 |
|||||||
4399 | Assorted milling cutters, insert type (1) Dijet #JHEL2-2100, Insert # JCB2100ES.ES, uses 3 inserts, has thru coolant ; (1) Ingersoll MAX-I-PEX, #16W1B1099802 53071, uses 8 inserts, no thru coolant, shank size of both 1" dia x 2-1/4" long. | Mill Tooling and Accessories | Cutters | 0.950" dia. Each APPROXIMATE | $45 EACH | 2 | 009 |
|||||||
4374 | Setco radius ball nose cutter, insert type, #H218.19-12-1.00-RE-26HA, 1" dia shank, coolant thru shank, 4 isert type. | Mill Tooling and Accessories | Cutters | 1.00" cut dia x 7-1/2" OAL | $60 EACH | 4 | 009 |
|||||||
4376 | Valenite milling cutters, insert type, #V590A13100WD17, thru coolant, 3 flute, 1" dia. X 2-1/4" long shank. | Mill Tooling and Accessories | Cutters | 1.000" cut Dia. X 1-5/8" long | $50 EACH | 2 | 009 |
|||||||
4383 | Valenite milling cutters, 2 flute, insert type, #VE90-AX100-W125, #PY-700T 4TO1, thru coolant type, Shank size 1-1/4" dia x 2-7/8" long, (1) is used, (1) is UNUSED | Mill Tooling and Accessories | Cutters | 1.000" dia x 1" long | $75 EACH | 2 | 009 |
|||||||
4395 | Valenite milling cutters, insert type, #539.11.128, thru coolant style, shank size 1" dia x 2-1/4", OAL 5-1/2" | Mill Tooling and Accessories | Cutters | 1.000" Dia x 3" long reach | $50 EACH | 3 | 009 |
|||||||
4387 | Valenite Centre-Dex endmill, #S-VMSP-098R-90CCC, 1 flute, coolant thru, shank size 3/4" x 2" long, (4) are used, (1) is UNUSED | Mill Tooling and Accessories | Cutters | 1.000" Dia. | $45 EACH | 4 | 009 |
|||||||
4377 | Setco 4 flute milling cutter, insert type, #R215.59-01.00-3-06. 1" x 2-1/4" shank. | Mill Tooling and Accessories | Cutters | 1.000" Dia. X 1-1/4" cut length | $50 EACH | 2 | 009 |
|||||||
4379 | Valanite Centre-Dex milling cutters, insert type with thru coolant hole, 1-1/4" dia x 2-1/4" long shank, #S-VMSP-123R-90CCC, (1) is used, (1) is UNUSED | Mill Tooling and Accessories | Cutters | 1.230" Cut x 1-3/8" lng | $65 EACH | 2 | 009 |
|||||||
4380 | Carboloy milling cutter, insert type, #R217.69-01.25-3-16, 3 flute, max. rpm 20050, shank size 1-1/4" dia. X 3" long. | Mill Tooling and Accessories | Cutters | 1.250" dia cut x 1-3/16" long | $65 EACH | 2 | 009 |
|||||||
4375 | Valenite milling cutters, inset type, #V590 A16 125 WE40, 3 flute, thru coolant feature, UNUSED | Mill Tooling and Accessories | Cutters | 1.250" Dia cut x 4" long (6-1/4" AOL), 1-1/4" Dia Shank | $100 EACH | 3 | 009 |
|||||||
4397 | Carboloy milling cutters, insert type, 3 flute, #R217.69-01.25-3-16, thru coolant style, shank size 1-1/4" dia x 2-1/4", OAL 4-1/2" | Mill Tooling and Accessories | Cutters | 1.250" Dia x 1-1/4" long reach | $40 EACH | 2 | 009 |
|||||||
4388 | Valenite cutters, insert type, 2 flute, #539.11.508, shank size 1-1/4" dia x 2-1/4". | Mill Tooling and Accessories | Cutters | 1.250" Dia x 2-1/4" long (OAL 4-3/4") | $45 EACH | 2 | 009 |
|||||||
4408 | Valenite milling cutter, 3539.11.508, 2 insert type, 5/8" dia threaded end, UNUSED | Mill Tooling and Accessories | Cutters | 1.250" Dia. X 1-3/8" long | $75 EACH | 2 | 010 |
|||||||
4402 | Valenite Centre-Dex endmill, #S-VMSP-125R-60CF, 2 flute, coolant thru, shank size 3/4" x 2" long. OAL 3-1/4". (1) Used, (1) UNUSED | Mill Tooling and Accessories | Cutters | 1.250" Dia. X 1-3/8" reach | $65 EACH | 1 | 009 |
|||||||
4386 | Valenite Mini-Mill chamfer cutters, #S-VMSP-138R-45CF, 2 flute, shank size 3/4" x 2-3/4" long, both UNUSED | Mill Tooling and Accessories | Cutters | 1.3/8" Dia x 45 Degrees | $65 EACH | 1 | 009 |
|||||||
4398 | Valenite Mini-Mill chamfer cutters, #S-VMSP-138R-45CF, 2 flute, shank size 3/4" x 2-3/4" long. Uses 2 inserts. | Mill Tooling and Accessories | Cutters | 1.375" Dia x 1-1/4" long reach | $45 EACH | 7 | 009 |
|||||||
4422 | Valenite milling cutters, insert type, 3/4" ida. Mount bore, #539.63.024, 5 flute, (1) used, (2) is UNUSED. | Mill Tooling and Accessories | Cutters | 1.500" Dia cut | $45 EACH | 3 | 010 |
|||||||
4396 | Valenite milling cutters, insert type, #539.11.134, thru coolant style, shank size 1-1/4" dia x 2-1/4", OAL 5-1/2" | Mill Tooling and Accessories | Cutters | 1.500" Dia x 3" long reach | $60 EACH | 2 | 009 |
|||||||
4384 | Widax-Heinlein indexable chamfer and angle endmill, insert type, # 229.28.310, shank size 1-1/4" x 2-1/4" long. (1) is used and (1) is UNUSED | Mill Tooling and Accessories | Cutters | 1.500" Dia. X 1-1/4" cut length | $75 EACH | 2 | 009 |
|||||||
4390 | Valenite milling cutter, insert type, 2flute, #TL# MX-449 / QDT00110-03, 5T00, coolant thru feature, shank size 1-1/4" Dia. X 2-1/4" long. (2) used (2) UNUSED | Mill Tooling and Accessories | Cutters | 1.5000" Dia cut x 2" long (OAL 4-1/4") | $65 EACH | 3 | 009 |
|||||||
4391 | Valenite milling cutter, insert type, 2flute, #TL# MX-450 / QDT00110-04, 5T00, coolant thru feature, shank size 1-1/4" Dia. X 2-1/4" long. (1) used (2) UNUSED | Mill Tooling and Accessories | Cutters | 1.6600" Dia cut x 2" long (OAL 4-1/4") | $65 EACH | 3 | 009 |
|||||||
4381 | Valenite Centre-Dex chamfer cutters, 2 flute, insert type, #S-VMSP-175R-45CF, Shank size 1" dia x 2-1/2" long. | Mill Tooling and Accessories | Cutters | 1.750" dia x 45 Degrees x 1-3/8" long | $65 EACH | 2 | 009 |
|||||||
4401 | Valenite Centre-Dex endmill, #S-VMSP-175R-45CF, 2 flute, coolant thru, shank size 3/4" x 2" long. OAL 3-1/4". | Mill Tooling and Accessories | Cutters | 1.750" Dia. X 1-3/8" reach | $55 EACH | 2 | 009 |
|||||||
4392 | Valenite milling cutter, insert type, 2flute, #TL# MX-451 / QDT00110-05, 5T00, coolant thru feature, shank size 1-1/4" Dia. X 2-1/4" long. All are UNUSED | Mill Tooling and Accessories | Cutters | 1.780" Dia cut x 2" long (OAL 4-1/4") | $75 EACH | 2 | 009 |
|||||||
4367 | Sandvik Modulmill milling cutter, insert type, # RA282.2 250, (12) triangular type carbide inserts. 9-7/8" actual cutting diameter, 1" wide x 6-1.2" long drive key slot on back. | Mill Tooling and Accessories | Cutters | 10" rated with 4-1.2" center hole | $100 EACH | 1 | 009 |
|||||||
4435 | Valenite milling cutter, 14 insert type, 2-1/2" mounting bore, #TL#MX-529 / QDT02072-01. | Mill Tooling and Accessories | Cutters | 10.000" Dia cut | $350 EACH | 2 | 009 |
|||||||
4434 | Valenite milling cutter, 14 insert type, 2-1/2" mounting bore, #VFA-120-14R-BDY 10/T/97, UNUSED | Mill Tooling and Accessories | Cutters | 12.000" Dia cut | $850 EACH | 1 | 009 |
|||||||
4433 | Valenite milling cutter, 12 insert type, 2-1/2" mounting bore, #TL# MX-520 / QDT02072-01 / 4T02 | Mill Tooling and Accessories | Cutters | 12.000" Dia. | $350 EACH | 1 | 009 |
|||||||
2929 | Special Cutter bar system, 4 insert type bolt on fixed cutters inserts per bar with cat 50 tool holder | Mill Tooling and Accessories | Cutters | 16 1/2" dia and 12 1/2" approx. | $75 Each | 2 | 019 |
|||||||
4394 | Valenite milling cutter, insert type, # TL# MX-553 / 200G2R28W6-STP20. TPFT2.52.52P-2S, V-MIL / PT488T, shank size 1-1/2" x 2-5/8" long. | Mill Tooling and Accessories | Cutters | 2" Dia. Cut, cutting head length 3" (OAL 6") | $100 EACH | 2 | 009 |
|||||||
4419 | Valenite milling cutters, insert type, 3/4" ida. Mount bore, #539.11.200. 4 flute | Mill Tooling and Accessories | Cutters | 2.000" Dia cut | $40 EACH | 3 | 010 |
|||||||
4421 | Valenite milling cutters, insert type, 3/4" ida. Mount bore, #539.63.024, 5 flute, (2) used, (1) is UNUSED. | Mill Tooling and Accessories | Cutters | 2.000" Dia cut | $50 EACH | 3 | 010 |
|||||||
4416 | Sumitomo milling cutters, 4 flute multi insert type, 1" mounting bore, model #WRDS5002.5R. | Mill Tooling and Accessories | Cutters | 2.000" Dia x 1-1/4" long cut | $45 EACH | 6 | 010 |
|||||||
4415 | Valenite milling cutters, 4 flute multi insert type, 3/4" mounting bore, model # unknown. | Mill Tooling and Accessories | Cutters | 2.000" Dia x 1-1/4" long cut | $45 EACH | 3 | 010 |
|||||||
4420 | Valenite milling cutters, insert type, 1" ida. Mount bore, #539.11.202. 4 flute, both are UNUSED. | Mill Tooling and Accessories | Cutters | 2.500" Dia cut | $75 EACH | 2 | 010 |
|||||||
4423 | Valenite milling cutters, insert type, 3/4" ida. Mount bore, #V590A130250G07R, 7 flute, (1) used, (1) is UNUSED. | Mill Tooling and Accessories | Cutters | 2.500" Dia cut | $45 EACH | 2 | 009 |
|||||||
4417 | WIDAX-Heinlein milling cutters, 4 flute insert type, 1" mounting bore, (2) model #4118 / 239.11.202 UNUSED and (2) used Valenite cutter, same as above # 539.11.202. | Mill Tooling and Accessories | Cutters | 2.500" Dia cut | $50 EACH | 4 | 010 |
|||||||
4385 | Valenite endmill cutter, insert type, # 53.963.226, shank size 1" x 2-1/4" long' (1) is used and (1) is UNUSED | Mill Tooling and Accessories | Cutters | 2.54MM Dia x 1-9/16" depth | $55 EACH | 2 | 009 |
|||||||
4366 | Sandvik Modulmill milling cutter, insert type, # RA283.2 080, (5) square type carbide inserts. | Mill Tooling and Accessories | Cutters | 3" dia. Cut x 3/4" Bore | $ EACH | 1 | 009 |
|||||||
4407 | Valenite milling cutter, insert type, 5 flute, 3 inserts per flute, 1-1/4" mounting bore, serra-Sin??, ass3-300-4R15-125F | Mill Tooling and Accessories | Cutters | 3" Dia. X 1-3/8" Long cut | $75 EACH | 15 | 010 |
|||||||
4413 | Valenite milling cutters, 6 insert type, 1" dia. Bore mount, # 539.63.046. | Mill Tooling and Accessories | Cutters | 3.000" Dia cut | $60 EACH | 3 | 010 |
|||||||
4411 | Assorted milling cutters, (2) Valenite #VFZA90A60300H05/XPHT-1504 / PT-962T / 6T03, (5) inserts; (1) Valenite 6 inserts, #539.63.046, all have 1" Dia. Bore mount. | Mill Tooling and Accessories | Cutters | 3.000" Dia. All Units | $80 EACH | 3 | 010 |
|||||||
4414 | Valenite milling cutters, 3 insert type, 1-1/4" dia. Bore mount, # MRN-SS-253-5R3-125F, Econo-Mizer, Loc-A-Dex, I-H-310-1, bot are UNUSED | Mill Tooling and Accessories | Cutters | 3.000" Dia. Cut | $100 EACH | 2 | 010 |
|||||||
4418 | Valenite milling cutters, round insert type, 5 flute, #539.11.204, (1) UNUSED and (2) Used. | Mill Tooling and Accessories | Cutters | 3.000" Dia. Cut | $50 EACH | 3 | 010 |
|||||||
4409 | Valenite milling cutter, MRN-SS-253-5R3-125F, 1.250" dia. mount, 3 insert type, | Mill Tooling and Accessories | Cutters | 3.000" Dia. X 2" long | $40 EACH | 3 | 010 |
|||||||
4412 | Sandvik Coromant milling cutter, insert type, #RA215.3-76-V80-74, 6 flute, 1-1/4" dia. Mount post. | Mill Tooling and Accessories | Cutters | 3.000" Dia. X 3-3/8" long cut | $100 EACH | 3 | 010 |
|||||||
3967 | fly cutter set, 3 pcs, single button type carbide tool | Mill Tooling and Accessories | Cutters | 3-1/2", 2-1/2", 1-1/2" x 3/4" shank | $50 FOR ALL | lot | 023 |
|||||||
2902 | Hanita Course Profile Shell Mill Rougher, M42, TC2327, UNUSED | Mill Tooling and Accessories | Cutters | 4" x 2 1/4" x 1 1/2" | $25 Each | 1 | 019 |
|||||||
4426 | Valenite milling cutters, insert type, 1-1/2" dia. mount bore, Serra-Sine III, SS3-400-4R18-150F, 6 flute. | Mill Tooling and Accessories | Cutters | 4.000" Dia x 1-1/2" long cut | $100 EACH | 1 | 009 |
|||||||
4425 | Valenite milling cutters, insert type, 1-1/4" ida. Mount bore, #539.11.206, 7 flute, (1) used, (1) is UNUSED. | Mill Tooling and Accessories | Cutters | 4.000" Dia cut | $100 EACH | 2 | 009 |
|||||||
4410 | Valenite milling cutter, , 1.500" dia. mount, 8 insert type, @539.63.050 - MX-470. | Mill Tooling and Accessories | Cutters | 4.000" Dia. X 5/8" cut | $100 EACH | 3 | 010 |
|||||||
4365 | Valenite Val-U-Edge milling cutter, inset type, #VUE 45N-050R-100F150, 10 insert. | Mill Tooling and Accessories | Cutters | 5" Cut Dia. With 1.500" center hole | $ EACH | 1 | 009 |
|||||||
4424 | Valenite milling cutters, insert type, 1-1/2" ida. Mount bore, #VFZA90A60500K06 / PT-962T / XPHT-1604, 6 flute, (1) used, (1) is UNUSED. | Mill Tooling and Accessories | Cutters | 5.000" Dia cut | $100 EACH | 2 | 009 |
|||||||
4429 | Valenite milling cutters, 8 flute, insert type, #VFZA-90A-6060-OK08 / XPHT-1604 / 8T9, (1) used & (1) UNUSED | Mill Tooling and Accessories | Cutters | 6" Dia. Cut | $125 EACH | 2 | 009 |
|||||||
3285 | Valenite cat 45 tool holder #v45ct-s150-40 with valenite 12pos. insert mill cutter #b-6-12r-15-n3 | Mill Tooling and Accessories | Cutters | 6" dia. Cutter | $125 Each | 1 | 019 |
|||||||
4427 | Valenite milling cutters, insert type, 2" dia. mount bore, 539.63.058, 10 flute. | Mill Tooling and Accessories | Cutters | 6.00 Dia. Cut | $100 EACH | 1 | 009 |
|||||||
4428 | MFGR Unknown milling cutters, insert type, 2" dia. mount bore, #T20 TORX, 10 flute. | Mill Tooling and Accessories | Cutters | 8.00 Dia. Cut | $125 EACH | 1 | 009 |
|||||||
4432 | Valenite Modco Tools milling cutters, 8 insert type, 2-1/2" bore, #TL#MX638 / M1022468, made in USA, (1) used & (2) UNUSED | Mill Tooling and Accessories | Cutters | 8.000" Dia cut | $175 EACH | 3 | 009 |
|||||||
4389 | Valenite cutters, assorted lot (1) each, #s 539.11.508; TL# MX-452/TXP00110-02; TXP00251-01/10T00; 539.63.226; VRS11117. | Mill Tooling and Accessories | Cutters | AOSSORTED | $250 FOR ALL | 4 | 009 |
|||||||
4371 | Niagara Cutter Tin Coated 3 Flute Rougher Endmills, #75425, Titanium Nitride coated, 1" shank, UNUSED | Mill Tooling and Accessories | Endmill | 1.00 " Dia. X 6" long (8-1/2" OAL) | $ EACH | 2 | 009 |
|||||||
4372 | Niagara Cutter Tin Coated 3 Flute Rougher Endmill, #75476, Titanium Nitride coated, 2" shank, UNUSED | Mill Tooling and Accessories | Endmill | 2.00 " Dia. X 8" long (11-3/4" OAL) | $ EACH | 1 | 010 |
|||||||
3965 | MULTI FLUE ENDMILL SET (6) PCS. | Mill Tooling and Accessories | Endmill | 3.4" TO 1-1/2" X 3/4 " SHANKS | $50 FOR ALL | LOT | 023 |
|||||||
3999 | HOUT TOOL STORAGE BOX WITH ASSORTED CONTENTS, #13350 Endmills | Mill Tooling and Accessories | Endmill | ASSORTED UNUSED ENDMILLS | $75 FOR ALL | 1 | 4A |
|||||||
4440 | Cincinnati dividing head, sn. CUE5P151, with 9" Buck 3 jaw chuck, Adjus-A-Tru design back, 1 pc. Hard reversible chuck jaws, (1) index plate, cuck mounting adapter wit #50 Taper to fit dividing head. NO head hand wheel.
https://www.hildebrandmachinery.com/tooling/4440-1.jpg; https://www.hildebrandmachinery.com/tooling/4440-2.jpg; https://www.hildebrandmachinery.com/tooling/4440-3.jpg
| Mill Tooling and Accessories | Indexer | 15" | $1500 EACH | 1 | 12F |
|||||||
3953 | TOOL HOLDER RACK FOR #40 TAPER TOOLS | Mill Tooling and Accessories | Other | $50 Each | 1 | 3A |
||||||||
2922 | Sanvik quick change cutter holder, #R210-066C6-14M, 4 insert milling cutter | Mill Tooling and Accessories | Quick Change | 2 3/4" dia cutter | $25 Each | 1 | 019 |
|||||||
3214 | Weldon tool holder #cnd-10-2 | Mill Tooling and Accessories | Tool Holder | 2"bore x #50 Taper | $50 Each | 1 | 019 |
|||||||
4321 | Newall DRO 2 Axis System for 9" x 48" Table Milling Machine, DP700 Display, complete kit with mounting brackets and display arm, All UNUSED in OEM boxes. New 10-12-2022, https://www.hildebrandmachinery.com/tooling/newalldro.pdf | Mill Tooling and Accessories | Unused Items | $2295 FOR ALL | 1 | ShopStorage |
||||||||
4110 | Collet rack, holds 30 5c collects, (1) used + (1) unused in box | Other Stuff | Collet | $35 FOR ALL | 2 | 004 |
||||||||
4196 | Mfgr unknown 5C collect indexer | Other Stuff | Indexer | 5C | $50 EACH | 1 | 008 |
|||||||
4318 | Trammel Set with wood case, 20" long x 5/16" dia rod, 1 fixed and 1 adjustable end points, (2) other angled points | Other Stuff | Miscellaneous | none | $30 FOR ALL | 1 | 023 |
|||||||
4042 | MASTERGRIP AIR TOOL SET, WAS 77 PIECE, SOME PIECES MISSING | Other Stuff | Other | $125 FOR ALL | 1 | 3A |
||||||||
4334 | Maya posi-stop arms. Model #8, D-12-L and D-12-R, 12" x 2" stop bar, right and left hands. New price is $640. EACH. | Other Stuff | Other | 12" x 2" stop face | $500 FOR ALL | 2 | 023 |
|||||||
4317 | Precision Tool You can Decide What They Are, 2" x 1.5x1.5" V block bolted to larger V block, tailstock piece with fixed center | Other Stuff | Other | 3-3/8" between tapers, taper unknown | $50 FOR ALL | 2 | 006 |
|||||||
4338 | Hand Shear, Mfg Unknown, hand operated, capacity unknown, replaceable and adjustable blades. Made in India. | Other Stuff | Other | 8-3/16" long knives | $100 EACH | 1 | 5A |
|||||||
4117 | SRATTETT BAND SAW BLADE STOCK, VARIOUS TYPES, TOTAL LENGTH QUANTITY UNKNOWN, ESTIMATED AT 50' + | Other Stuff | Saw Blades | 1/2" WIDE | $25 FOR ALL | 5 PKS | 004 |
|||||||
4118 | STARRETT BAND SW BLADE STOCK IN FACTORY BOX, APPROX. 200+FEET, FLEX BACK, TYPE - REGULAR | Other Stuff | Saw Blades | 1/2" X .025" X 14 TOOTH | $50 FOR ALL | 1 | 3A |
|||||||
4119 | STARRETT BAND SAW BLADE STOCK IN FACTORY BOX, APPROX. 200+FEET, FLEX BACK, TYPE - REGULAR | Other Stuff | Saw Blades | 3/8" X .025" X 8 TOOTH | $50 FOR ALL | 1 | 3A |
|||||||
4086 | YUASA TAILSTOCK #550-103 | Other Stuff | Tailstock | 4" | $100 EACH | 1 | 023 |
|||||||
4087 | BRIDGEPORT TAILSTOCK, ADJUSTABLE | Other Stuff | Tailstock | 8" | $250 EACH | 1 | 023 |
|||||||
4436 | Mfgr ? Tool Cart for #40 taper tooling, 84 pockets, on wheels, (7) tools per removeable bar, NO plastic pocket protectors, overall size 39" x 30" x 41" High. | Other Stuff | Tool Holder | $295 EACH | 1 | floor |
||||||||
4114 | HARRIS 0308LF5 308L Welding Wire, Stainless Steel Spool, 0.035" x 10 lb., AWS/SFA A5.9, HEAT 2K467, UNUSED | Other Stuff | Welding Wire | 0.035" | $50 EACH | 1 | 004 |
|||||||
4329 | Press Die Set with Danly Guide Bearings and box of hold dwn clamps. | Punch and Dies | Dies Sets for Presses | 11" x 25" x 1-1/2" Thick | $495 EACH | 1 | FLOOR |
|||||||
4049 | TURN TABLE, MANUAL, CUSTOM BUILT, NON MOTORIZED WITH 2 TABLES AND ADJUSTABLE TOOL HOLDER CLAMP | Tables Rotary and Sub | Other | 6-1/4" & 8" TABLE DIAMETERS | $150 FOR ALL | 1 | 3A |
|||||||
3970 | TAPMATIC REVERSIBLE TAPPING HEAD, MODEL 30TC/DC WITH (1) COLLET, #33JT MOUNT WITH 5/8" STRAIGHT SHANK TANG | Tapping | Tapping | #0 TO 1/4", M1.4 TO M6 | $200 Each | 1 | 023 |
|||||||
3968 | TAPMATIC REVERSIBLE TAPPING HEAD, MODEL 30TC/DC WITH (2) COLLETS AND (2) WRENCHES, #33JT MOUNT WITH 5/8" STRAIGHT SHANK TANG | Tapping | Tapping | #0 TO 1/4", M1.4 TO M6 | $250 Each | 1 | 023 |
|||||||
3971 | TAPMATIC REVERSIBLE TAPPING HEAD, MODEL r5 WITH (1 COLLET, #33JT MOUNT WITH 1/2" STRAIGHT SHANK TANG | Tapping | Tapping | #6 TO 1/2", M3 TO M12 | $250 Each | 1 | 023 |
|||||||
4190 | Efem geometric die head G5 with (1) set of 5/8-11 chasers, 5" head diameter, shank size 1-1/2" dia x 4" long. | Tapping | Tapping | 1-1/2" maximum | $350 EACH | 1 | 008 |
|||||||
4326 | Salvo and Winter thread rolling dies, used and UNUSED with (2) Salvo die holders. For more pictures go to: https://www.hildebrandmachinery.com/tooling/4326-threadrollingpackage.pdf | Thread Rolling | Thread Rolling Dies | Assorted Inch and Metric | $1500 FOR ALL | LOT | 13F |
|||||||
1072 | Insert cutter F90LN D4.00 08 1.50 R N15 with holder | Tool Holders 50 NMTB | Cutters | 4" dia. Cutter | $100 EACH | 1 | 020 |
|||||||
4136 | Mfgr Unknown, shell mill tool holders | Tool Holders 50 NMTB | Endmill | #50 NMTB taper x 1 pc is 1", 2 pcs 1.500" | $30 FOR ALL | 2 | 004 |
|||||||
4137 | Mfgr Unknown, endmill tool holders, 1 Piece Has Been SOLD | Tool Holders 50 NMTB | Endmill | #50 NMTB taper x 1/2", 7/8", 1" | $30 FOR ALL | 1 | 004 |
|||||||
1079 | Endmill holders, 1 piece has been sold | Tool Holders 50 NMTB | Endmill | 1.500 " endmill | $20 EACH | 5 | 20 |
|||||||
1078 | Endmill holders, assorted, 2 pieces have been SOLD | Tool Holders 50 NMTB | Endmill | 1.500" endmill | $35 EACH | 5 | 020 |
|||||||
1058 | Endmill holder with 2 1/2" x 8" bar | Tool Holders 50 NMTB | Endmill | 2 1/2" endmill | $50 EACH | 1 | 020 |
|||||||
1070 | Assorted endmill holders | Tool Holders 50 NMTB | Endmill | 2" endmill | $75 EACH | 2 | 020 |
|||||||
1071 | Assorted endmill holders | Tool Holders 50 NMTB | Endmill | 2" endmill | $75 EACH | 2 | 020 |
|||||||
3826 | Bison Tool endmill holder, #7620-50-2- QC | Tool Holders 50 NMTB | Endmill | 2.000" dia. X .250" deep | $50 Each | 1 | 005 |
|||||||
4364 | Mfgr Unknown milling cutter holder, NST 50 taper. | Tool Holders 50 NMTB | Shellmill | 1.500" Dia center post x 3-7/8" Dia. Body | $25 EACH | 1 | 023 |
|||||||
4124 | NIKKEN collet type tool holder, #BT45-DW4-120, no collet included | Tool Holders BT45 | Collet | collet type, no collet included | $25 EACH | 12 | 004 |
|||||||
4125 | NIKKEN collet type tool holder, #BT45-DW5-135, no collet included | Tool Holders BT45 | Collet | collet type, no collet included | $30 EACH | 9 | 003 |
|||||||
4163 | NIKKEN Tool Holders, #BT45-WE1/2-75 | Tool Holders BT45 | Endmill | 0.750" | $20 EACH | 5 | 011 |
|||||||
4162 | NIKKEN Tool Holders, #BT45-WE3/4-85 | Tool Holders BT45 | Endmill | 0.750" | $20 EACH | 12 | 011 |
|||||||
4161 | NIKKEN Tool Holders, #BT45-WE1-90 | Tool Holders BT45 | Endmill | 1.000" | $20 EACH | 8 | 011 |
|||||||
4159 | NIKKEN Tool Holders, #BT45-WE1-1/4-90 | Tool Holders BT45 | Endmill | 1.250" | $15 EACH | 4 | 011 |
|||||||
4160 | NIKKEN Tool Holders, #BT45-WE1-1/2-110 | Tool Holders BT45 | Endmill | 1.500" | $20 EACH | 4 | 011 |
|||||||
4134 | Lyndex tool holder #BT45-MTA4-90, Morse taper #4 | Tool Holders BT45 | Morse Taper | #4 Morse Taper | $30 EACH | 3 | 004 |
|||||||
4128 | NIKKEN tool holder, #BT45-FMD38.1-6 | Tool Holders BT45 | Shellmill | 1.500" Dia. Post | $35 EACH | 1 | 004 |
|||||||
4164 | NIKKEN Shellmill Holder, #BT45-FMD38.1-60 | Tool Holders BT45 | Shellmill | 1.500" Post | $20 EACH | 1 | 011 |
|||||||
4131 | NIKEN tap holder, tool holder #BT45-Z12-115 | Tool Holders BT45 | Tap Drivers | Tap | $50 EACH | 2 | 004 |
|||||||
4130 | NIKEN tap holder, tool holder #BT45-Z24-105 | Tool Holders BT45 | Tap Drivers | Tap | $75 EACH | 2 | 004 |
|||||||
4146 | LYNDEX collect type tool holder, # unknown, no collect included, 1 collar missing | Tool Holders BT50 | Collet | collet | $25 FOR ALL | 3 | 003 |
|||||||
4147 | LYNDEX collect type tool holder, #B5007-1500, collect not included | Tool Holders BT50 | Collet | collet | $50 EACH | 3 | 003 |
|||||||
4145 | Mfgr Unknown collect type tool holder, # unknown, no collect included | Tool Holders BT50 | Collet | collet | $25 EACH | 5 | 003 |
|||||||
4150 | LYNDEX tool holder with Keyless drill chuck | Tool Holders BT50 | Drill Chucks | 0 - 1/2" x #6 Jacobs Taper | $75 EACH | 1 | 003 |
|||||||
4153 | LYNDEX endmill tool holder | Tool Holders BT50 | Endmill | 0.500" & 0.750" | $25 FOR ALL | 2 | 003 |
|||||||
4152 | LYNDEX long nose endmill tool holders | Tool Holders BT50 | Endmill | 0.500" x 4-1/4" reach | $25 EACH | 2 | 003 |
|||||||
4154 | LYNDEX endmill tool holders | Tool Holders BT50 | Endmill | 0.625" | $25 EACH | 2 | 003 |
|||||||
4151 | LYNDEX long nose endmill tool holders | Tool Holders BT50 | Endmill | 0.750" x 4-1/4" reach | $25 EACH | 4 | 003 |
|||||||
4156 | Lyndex endmill tool holders | Tool Holders BT50 | Endmill | 0.875" | $25 EACH | 2 2 | 011 |
|||||||
4155 | Lyndex endmill tool holders | Tool Holders BT50 | Endmill | 1.000" | $25 EACH | 4 | 011 |
|||||||
4157 | Lyndex endmill tool holders | Tool Holders BT50 | Endmill | 1.250" | $25 EACH | 2 | 011 |
|||||||
4158 | Lyndex endmill tool holders | Tool Holders BT50 | Endmill | 1.500" | $25 EACH | 3 | 011 |
|||||||
4133 | Lyndex tool holder, #4 morse taper | Tool Holders BT50 | Morse Taper | #4 Morse Taper | $40 EACH | 4 | 004 |
|||||||
4143 | LYNDEX shell mill tool holder | Tool Holders BT50 | Shellmill | 1.500" post x 3-3/4" Dia. Body | $25 EACH | 1 | 003 |
|||||||
2734 | Valenite Tool Holder, #TAP 312 52 50BT, 4/31629/9, as new unused | Tool Holders BT50 | Tapping | tapping | $75 Each | 1 | 019 |
|||||||
4032 | ANN WAY COLLECT TYPE TOOL HOLDER, CAT 40-ER32-5 WITH SPANNER WRENCH, NO SPRING COLECT, UNUSED | Tool Holders Cat 40 | Collet | COLLET | $50 EACH | 1 | 032 |
|||||||
4035 | ROYAL ENDMILL TOOL HOLDER, CAT40, CAT40-3/16X4-1/2, #54014, S/N LHR, UNUSED | Tool Holders Cat 40 | Endmill | 0.187" | $75 EACH | 1 | 023 |
|||||||
3837 | Lyndex tool holders, #C4006-1250, 3 pcs. Must take all or none | Tool Holders Cat 40 | Endmill | 1.250" x 3" long | $45 FOR ALL | LOT | 005 |
|||||||
4036 | BISON SHELLMILL TOOL HOLDER, CAT40 TAPER, #7385-40X4-1/4 X 2-1/8, UNUSED | Tool Holders Cat 40 | Shellmill | 1.250" POST DIAMETER | $100 EACH | 1 | 023 |
|||||||
4039 | BISON SHELLMILL TOOL HOLDER, CAT40, CODE 7-186-040, #7385-40-1,1/2-2.13/32G, UNUSED | Tool Holders Cat 40 | Shellmill | 1.500" POST DIAMETER | $100 EACH | 1 | 023 |
|||||||
4010 | LYNDEX ENDMILL HOLDER, CAT 40, C4006-0187DIN, CAT40-CEMH3/16-2.50, BALANCED | Tool Holders Cat 40 | Tool Holder | 0.187" | $100 EACH | 1 | 023 |
|||||||
4009 | LYNDEX ENDMILL HOLDER, CAT 40, C4006-0250DIN, CAT40-CEMH1/4-2.50, BALANCED | Tool Holders Cat 40 | Tool Holder | 0.250" | $100 EACH | 1 | 023 |
|||||||
4017 | PARLEC ENDMILL TOOL HOLDER, C40-37EM2, #476772, MADE IN THE USA, UNUSED | Tool Holders Cat 40 | Tool Holder | 0.375" | $60 EACH | 1 | 023 |
|||||||
4024 | PARLEC SHELL MILL TOOL HOLDER, C40-37EM2, #456101, MADE IN THE USA, UNUSED | Tool Holders Cat 40 | Tool Holder | 0.375" | $80 EACH | 1 | 023 |
|||||||
4016 | LYNDEX ENDMILL HOLDER, CAT 40, C4006-0437, CAT40-EMH7/16-2.50 | Tool Holders Cat 40 | Tool Holder | 0.437" | $60 EACH | 1 | 023 |
|||||||
4000 | Lyndex endmill tool holder , cat 40, C4006-0625, cat 40-EMH5/8-3.00 | Tool Holders Cat 40 | Tool Holder | 0.625" | $50 EACH | 2 | 023 |
|||||||
4019 | PARLEC ENDMILL TOOL HOLDER, C40-75EM1, #455767, MADE IN THE USA, UNUSED | Tool Holders Cat 40 | Tool Holder | 0.750" | $60 EACH | 1 | 023 |
|||||||
4004 | LYNDEX SHELL MILL HOLDER, CAT 40, C4001-0750, CAT 40-SMH3/4-1.75 | Tool Holders Cat 40 | Tool Holder | 0.750" POST | $75 EACH | 1 | 023 |
|||||||
4005 | LYNDEX SHELL MILL HOLDER, CAT 40, C4001-0750, CAT 40-SMH3/4-1.75 | Tool Holders Cat 40 | Tool Holder | 01.000" POST | $55 EACH | 1 | 023 |
|||||||
4002 | Lyndex endmill tool holder , cat 40, C4006-0625, cat 40-EMH1-1/2-2.50 | Tool Holders Cat 40 | Tool Holder | 1.250" | $50 EACH | 1 | 023 |
|||||||
4022 | PARLEC SHELL MILL TOOL HOLDER, C40-12SM2, #TH14125, MADE IN THE USA, UNUSED | Tool Holders Cat 40 | Tool Holder | 1.250" | $100 EACH | 1 | 023 |
|||||||
4023 | PARLEC SHELL MILL TOOL HOLDER, C40-37EM4, #12053, MADE IN THE USA, UNUSED | Tool Holders Cat 40 | Tool Holder | 1.250" | $100 EACH | 1 | 023 |
|||||||
4003 | Lyndex Jacobs Taper Tool Holder , cat 40, C4006-0625, cat 40-JTA3-1.58 | Tool Holders Cat 40 | Tool Holder | JTA3 - JACOBS TAPER | $75 EACH | 1 | 023 |
|||||||
0497 | BRINEY TOOL HOLDER #V45DA-180-300, COLLET NUT MISSING | Tool Holders Cat 45 | Collet | COLLET TYPE | $20 Each | 1 | 005 |
|||||||
0495 | Briney tol holder #V45DA-180-300, holder only no collet | Tool Holders Cat 45 | Collet Chucks | Collet type | $50 Each | 1 | 005 |
|||||||
1915 | SPI Jacobs taper drill chuck holders | Tool Holders Cat 45 | Drill Chucks | Jacobs chuck taper | $25 Each | 3 | 020 |
|||||||
0496 | BRINEY ENDMILL TOOL HOLDER #V45E-505-262 | Tool Holders Cat 45 | Endmill | .500 DIAM | $25 Each | 1 | 005 |
|||||||
2005 | tecnara endmill holders | Tool Holders Cat 45 | Endmill | 0.187" # 145-300-5 and .375" #145-308-3 | $20 Each | 1 | 019 |
|||||||
0507 | BRINEY TOOL HOLDER #V45E-025-250, UNUSED | Tool Holders Cat 45 | Endmill | 0.250" | $50 Each | 1 | 005 |
|||||||
0509 | BRINEY TOOL HOLDER #V45E-025-250, UNUSED | Tool Holders Cat 45 | Endmill | 0.250" | $50 Each | 1 | 005 |
|||||||
0510 | BRINEY TOOL HOLDER #V45E-025-250, UNUSED | Tool Holders Cat 45 | Endmill | 0.250" | $50 Each | 1 | 005 |
|||||||
0508 | BRINEY TOOL HOLDER #V45E-025-250, UNUSED | Tool Holders Cat 45 | Endmill | 0.250" | $50 Each | 1 | 005 |
|||||||
0498 | BRINEY TOOL HOLDER #V45E-038-450, UNUSED | Tool Holders Cat 45 | Endmill | 0.375" | $50 Each | 1 | 005 |
|||||||
0502 | BRINEY TOOL HOLDER #V45E-050-262, UNUSED | Tool Holders Cat 45 | Endmill | 0.500" | $50 Each | 1 | 005 |
|||||||
0513 | BRINEY TOOL HOLDER #V45E-050-262, UNUSED | Tool Holders Cat 45 | Endmill | 0.500" | $50 Each | 1 | 005 |
|||||||
1916 | BIG endmill holders | Tool Holders Cat 45 | Endmill | 0.500" x 4" | $25 Each | 2 | 020 |
|||||||
0504 | TECHLEADER TOOL HOLDER #CT45-SL3/4-4.00, UNUSED | Tool Holders Cat 45 | Endmill | 0.750" | $50 Each | 1 | 005 |
|||||||
1924 | BIG endmill holders # CV45-EM1.00-4.000x 1 piece has been SOLD | Tool Holders Cat 45 | Endmill | 1.000" | $25 Each | 1 | 020 |
|||||||
1926 | Carboloy endmill holder #CV45-EM 4.00-1000 | Tool Holders Cat 45 | Endmill | 1.000" | $25 Each | 1 | 020 |
|||||||
1919 | VALENITE ENDMILL HOLDERS # V45CT-E125 (5 PCS) and (1) CARBOLOY HOLDER CV45-EM4.00-1250, 1 Piece Has Been SOLD | Tool Holders Cat 45 | Endmill | 1.250" | $25 Each | 5 | 020 |
|||||||
0499 | BRINEY TOOL HOLDER #V45E-125-400, UNUSED | Tool Holders Cat 45 | Endmill | 1.250" | $50 Each | 1 | 005 |
|||||||
0500 | BRINEY TOOL HOLDER #V45E-125-400, UNUSED | Tool Holders Cat 45 | Endmill | 1.250" | $50 Each | 1 | 005 |
|||||||
1920 | BIG morse taper tool holders #CV45-MT2-2.500, 1 Piece Has Been SOLD | Tool Holders Cat 45 | Morse Taper | #2 morse | $25 Each | 1 | 020 |
|||||||
1921 | BIG morse taper tool holders #CV45-MT3-2.500 | Tool Holders Cat 45 | Morse Taper | #3 Morse | $25 Each | 1 | 020 |
|||||||
0512 | BRINEY TOOL HOLDER #V45SM-100-200, UNUSED | Tool Holders Cat 45 | Shellmill | 1.00" DIAMETER POST | $50 Each | 1 | 005 |
|||||||
0501 | BRINEY TOOL HOLDER #V45SM-100-200, UNUSED | Tool Holders Cat 45 | Shellmill | 1.000" POST | $50 Each | 1 | 005 |
|||||||
1928 | Cutter holders, (1) Valenite #8-Y-4, V45CT-S125-22 and (1) BIG CV45-SM1.250-2.000 | Tool Holders Cat 45 | Shellmill | 1.250" dia. Post | $25 Each | 2 | 020 |
|||||||
1929 | SHELL MILL HOLDERS, (1) VALENITE#12-T-5 / V45CT-S150-24 and (1) BALAS #45MM-VF-2.5-SM12, 1 Piece Has Been SOLD | Tool Holders Cat 45 | Shellmill | 1.500" dia post | $25 Each | 1 | 020 |
|||||||
0503 | BRINEY TOOL HOLDER #A3115B / V45SM-150-240, UNUSED | Tool Holders Cat 45 | Shellmill | 1.500" POST | $50 Each | 1 | 005 |
|||||||
1931 | Carboloy machine center spring loaded tap holders #CV45-TH, 4.95-0100, with tap holders #C0-78913 and 78915 | Tool Holders Cat 45 | Tapping | $35 Each | 2 | 020 |
||||||||
1930 | Carboloy machine center spring loaded tap holders #CV45-TH,5.12-0200, no tap holders | Tool Holders Cat 45 | Tapping | $25 Each | 2 | 020 |
||||||||
4129 | Command cutter holders #554-2000, 1 Piece Has Been SOLD | Tool Holders Cat 45 | Tool Holder | 5.000" Dia face x 2" dia post | $75 EACH | 1 | 004 |
|||||||
1927 | Sandvik tool holders, varilock # 390.45-45 50 050M | Tool Holders Cat 45 | Varilock | varilock | $25 Each | 3 | 020 |
|||||||
4358 | Sandvik tool holder #A390.45-50 63 050M WITH Varilock adapter # 391.02-80 63 060 an adapter# 391.02-50 80 060 and Varilock end #391.20-12 50 060M and A391.20-09 50 050. Endmill holder tips. | Tool Holders Cat 50 | Collet | 0.375" and 0.500" | $50 EACH | 2 | 007 |
|||||||
4359 | Balas collect type tool holder, CAT 50 taper, #50MM-VF4-C8. | Tool Holders Cat 50 | Collet | collect | $25 EACH | 3 | 007 |
|||||||
4360 | Collect type tool holders with coolant collars, (2) CFT Systems (USA) #C50-TG10-7 #392 and (1) Geo. Williams Co CFT #50-TG10-7, CAT 50 tapers, (1) collect in each unit. | Tool Holders Cat 50 | Collet | Collect | $75 EACH | 3 | 007 |
|||||||
4356 | Sandvik tool holder #A390.45-45 63 050M WITH Varilock adapter # 391.02-50 63 060 and Varilock end #391.18-09 50075M spring collect end unit. | Tool Holders Cat 50 | Collet | collect | $50 EACH | 5 | 007 |
|||||||
4357 | Sandvik tool holder #A390.45-50 63 050M WITH Varilock adapter # 391.02-50 63 060 and Varilock end #391.18-25 50 070 spring collect end unit. | Tool Holders Cat 50 | Collet | collect | $50 EACH | 2 | 007 |
|||||||
4141 | VALENITE tool holders, collet type, #V50CT-10SG-35, no spring collet included | Tool Holders Cat 50 | Collet | COLLET | $25 EACH | 4 | 003 |
|||||||
4140 | VALENITE tool holders, collet type, #V50CT-15SG-35, no spring collet included | Tool Holders Cat 50 | Collet | COLLET | $25 EACH | 5 | 003 |
|||||||
2936 | Kennametal tool holder #CV50RDL397, 6755ce3, no collect cap | Tool Holders Cat 50 | Collet | COLLET | $25 Each | 1 | 019 |
|||||||
2937 | Kennametal tool holder #cv50sd75350 | Tool Holders Cat 50 | Collet | COLLET | $25 Each | 1 | 019 |
|||||||
2941 | Kennametal tool holder #cv50tg0502790, 5466cc2 | Tool Holders Cat 50 | Collet | COLLET | $25 Each | 1 | 019 |
|||||||
2933 | Kennametal tool holder #CV50TG050300 | Tool Holders Cat 50 | Collet | COLLET | $25 Each | 2 | 019 |
|||||||
2931 | KENNAMETAL TOOL HOLDER #CV50TG100300, NO SPRING COLLECTS SUPPLED, NO COLLECT NUT FOR 1 UNIT. | Tool Holders Cat 50 | Collet | COLLET | $50 Each | 2 | 019 |
|||||||
2935 | Kennametal tool holder #CV50TG100750, 1169CB8 | Tool Holders Cat 50 | Collet | COLLET | $40 Each | 1 | 019 |
|||||||
2932 | Kennametal tool holder #CV50TG150750, 7750CD2 | Tool Holders Cat 50 | Collet | COLLET | $50 Each | 1 | 019 |
|||||||
4142 | LYNDEX spring type collect holder #?, with spring collect | Tool Holders Cat 50 | Collet | COLLET | $25 EACH | 3 | 003 |
|||||||
2940 | Sandvik tool holder #50mm-vp-060-cg20 | Tool Holders Cat 50 | Collet | COLLET | $25 Each | 1 | 019 |
|||||||
2943 | SYIC tool holder #cat50-er16-6, no collect cap | Tool Holders Cat 50 | Collet | COLLET | $25 Each | 1 | 019 |
|||||||
3854 | Mfgr unknown collect type tool holders, 2 pcs., no collect included, Must take all or none | Tool Holders Cat 50 | Collet | collet - not included | $50 FOR ALL | 2 | 005 |
|||||||
3853 | Mfgr unknown collect type tool holders, 2 pcs., no collect included, Must take all or none | Tool Holders Cat 50 | Collet | collet - not included | $50 FOR ALL | LOT | 005 |
|||||||
3852 | Mfgr unknown collect type tool holders, 3 pcs., no collect included, Must take all or none | Tool Holders Cat 50 | Collet | collet - not included | $25 FOR ALL | LOT | 005 |
|||||||
3916 | Erickson Collect type tool holder #CV50TG200800, no collect supplied | Tool Holders Cat 50 | Collet | Collet type - no collet supplied | $75 Each | 2 | 19 |
|||||||
3917 | Erickson Collect type tool holder #CV50TG200800, no collect supplied | Tool Holders Cat 50 | Collet | Collet type - no collet supplied | $75 Each | 2 | 19 |
|||||||
3855 | Mfgr unknown collect type tool holder | Tool Holders Cat 50 | Collet | collet with 1-1/4" spring collect | $25 EACH | 1 | 005 |
|||||||
4346 | Sandvik endmill tool holders, #C6K5-0375 & C6K5-0500, CAT 50. | Tool Holders Cat 50 | Endmill | 0.375" & 0.500" | $45 FOR ALL | 2 | 007 |
|||||||
4348 | Sandvik long nose tool holders, #50MM-VF6.500-EM3 | Tool Holders Cat 50 | Endmill | 0.375" x 5" long nose | $45 EACH | 2 | 007 |
|||||||
4354 | Balas endmill tool holders, #50MM-VF4-EM4, CAT 50 taper. | Tool Holders Cat 50 | Endmill | 0.500" | $30 EACH | 2 | 007 |
|||||||
4355 | Balas endmill tool holders, #50MM-VF4-EM4, CAT 50 taper. | Tool Holders Cat 50 | Endmill | 0.500" | $30 EACH | 2 | 007 |
|||||||
4353 | Balas endmill tool holders, #50MM-VF4-EM5, CAT 50 taper. | Tool Holders Cat 50 | Endmill | 0.625" | $30 EACH | 2 | 007 |
|||||||
4347 | Sandvik endmill tool holders, #C6K6, CAT 50 Taper. | Tool Holders Cat 50 | Endmill | 0.625" & 0.750" | $40 FOR ALL | 2 | 007 |
|||||||
1656 | GandL DAVIS #374-02163-02 ENDMILL HOLDERS, 6" REACH | Tool Holders Cat 50 | Endmill | 0.750" | $25 EACH | 1 | 005 |
|||||||
4352 | Balas endmill tool holders, #50MM-VF4-EM7, CAT 50 taper. | Tool Holders Cat 50 | Endmill | 0.875" | $30 EACH | 2 | 007 |
|||||||
1653 | Parlec 87EM5, #6147 endmill holder, 4.250" reach | Tool Holders Cat 50 | Endmill | 0.875" | $25 EACH | 1 | 005 |
|||||||
4349 | Sandvik endmill holders, #50MM-VF4.000-EM8, CAT 50 taper. | Tool Holders Cat 50 | Endmill | 1.000" | $25 EACH | 3 | 007 |
|||||||
4351 | Sandvik endmill tool holders, #50MM-VF4-EM8, CAT 50 taper. | Tool Holders Cat 50 | Endmill | 1.000" | $20 EACH | 3 | 007 |
|||||||
4350 | Balas endmill holders, #50MM-VF4-EM10 2MM-VF4-EM12 | Tool Holders Cat 50 | Endmill | 1.250" & 1.500" | $45 FOR ALL | 2 | 007 |
|||||||
1454 | Collis and mfgr unknown endmill holders with cutters, 1 piece has been sold | Tool Holders Cat 50 | Endmill | 1.500" | $35 Each | 1 | 020 |
|||||||
1650 | TSD UNIVERSAL and MFGR ? ENDMILL HOLDERS, TSD#465001 | Tool Holders Cat 50 | Endmill | 1.500" | $25 EACH | 1 | 005 |
|||||||
3857 | Mfgr unknown endmill tool holder | Tool Holders Cat 50 | Endmill | 1.500" dia x 7" long | $25 Each | 1 | 005 |
|||||||
4344 | Sandvik Coromant endmill tool holders, CAT 50 tpaer, #50MM-VF6-EM16 | Tool Holders Cat 50 | Endmill | 2" | $50 EACH | 2 | 007 |
|||||||
4343 | Mfgr Unknown endmill tool holders, CAT 50 taper | Tool Holders Cat 50 | Endmill | 2.00" | $50 EACH | 3 | 007 |
|||||||
4149 | VALENITE endmill tool holder, #V50CT-E200 | Tool Holders Cat 50 | Endmill | 2.000 | $100 EACH | 1 | 003 |
|||||||
3842 | Parlec tool holder for endmill | Tool Holders Cat 50 | Endmill | 2.000" x 5" long | $50 Each | 1 | 005 |
|||||||
2960 | Multibore tool holder #t011624-0, 132-022 | Tool Holders Cat 50 | Miscellaneous | $25 Each | 1 | 019 |
||||||||
2948 | Sandvik Coromant tool holder #c4-a390.45-50-040 with c4-391.19-20-089 | Tool Holders Cat 50 | Miscellaneous | $25 EACH | 1 | 019 |
||||||||
2951 | Sandvik tool holder #c4-a390.45-50-040 with #c4-391.01-40-060a, #c4-391.eh-10-041 | Tool Holders Cat 50 | Miscellaneous | $25 Each | 1 | 019 |
||||||||
2503 | Parlec morse taper tool holder, #C50-01MT1 | Tool Holders Cat 50 | Morse Taper | #1 Morse | $20 Each | 1 | 005 |
|||||||
4345 | Sandvik mores taper tool holder, CAT 50 | Tool Holders Cat 50 | Morse Taper | #2, #4, #5 Morse Tapers | $65 FOR ALL | 3 | 007 |
|||||||
4341 | (1) Sandvik & (2) Balas #3 morse taper tool holders, | Tool Holders Cat 50 | Morse Taper | #3 Morse Taper | $25 EACH | 3 | 007 |
|||||||
4342 | Command tool holder, C6M4-0003, CAT 50 taper | Tool Holders Cat 50 | Morse Taper | #3 Morse Taper | $25 EACH | 2 | 007 |
|||||||
4340 | Command tool holder, C6M4, CAT 50 taper | Tool Holders Cat 50 | Morse Taper | #5 Morse Taper | $25 EACH | 2 | 007 |
|||||||
2500 | Parlec morse taper tool holder, #C50-05MT4-49866 | Tool Holders Cat 50 | Morse Taper | #5 morse taper | $25 Each | 1 | 005 |
|||||||
4368 | Erickson Cat 50 tool holder #CV50MT2200 | Tool Holders Cat 50 | Morse Taper | 2 Morse Taper | $30 EACH | 1 | 009 |
|||||||
1665 | Techniks #SYIC-22721 / CAT50xFMA3/4"-1.5" shell mill holder | Tool Holders Cat 50 | Shellmill | 0.750" | $25 EACH | 1 | 020 |
|||||||
4362 | Precision Componets Co (USA) long nose shell mill holder #CAT-50-.750FMX-6, CAT 50 taper. | Tool Holders Cat 50 | Shellmill | 0.750" Dia. Post, 1.90" dia. OD bar x 5" long | $50 EACH | 1 | 007 |
|||||||
1670 | LYNDEX and AH SHELL MILL HOLDERS | Tool Holders Cat 50 | Shellmill | 1.500" | $25 EACH | 2 | 020 |
|||||||
4144 | VALENITE shell mill tool holder #V50CT-S150-24 | Tool Holders Cat 50 | Shellmill | 1.500" post x 3-1/2" Dia. Body | $25 EACH | 1 | 003 |
|||||||
1668 | SHELL MILL HOLDER, MFGR UNKNOWN | Tool Holders Cat 50 | Shellmill | 2" DIAMETER POST | $20 Each | 1 | 020 |
|||||||
4363 | Sandvik Varilock mill cutter holder # A391.05-50 80 030, Center post Dia. Is 2", has a 1'4" wall ring over the post to to make a 2.500" dia. Post, CAT 50 taper. | Tool Holders Cat 50 | Shellmill | 2.00" Dia center post x 5.125" OD Body | $150 EACH | 1 | 023 |
|||||||
1667 | Parlec #16465 and mfgr unknown shell mill holders | Tool Holders Cat 50 | Shellmill | 2.500" | $25 EACH | 2 | 020 |
|||||||
2917 | Kennametal shellmill holder #CV50SM12550, 2854C12 with Spadco 5 insert milling cutter #118.204, 4.01005R313U | Tool Holders Cat 50 | Shellmill | 4.000" | $50 Each | 1 | 019 |
|||||||
0368 | Kennametal/Erickson shell mill holder | Tool Holders Cat 50 | Shellmill | shellmill | $50 Each | 1 | 020 |
|||||||
0370 | Valenite shell mill holder, V50CT-S150-24 | Tool Holders Cat 50 | Shellmill | shellmill | $50 Each | 1 | 020 |
|||||||
4139 | BALAS tap holder #50MM-VF-S16-THTC-C8 | Tool Holders Cat 50 | Tap Drivers | unknown | $50 EACH | 2 | 003 |
|||||||
4138 | Technara tp holder #150-012-4 and Balas tap holder #50MM-VF-THTC-C4 | Tool Holders Cat 50 | Tap Drivers | unknown | $30 FOR ALL | 2 | 003 |
|||||||
4339 | Command tool holder, C6M4-0004, CAT 50 taper | Tool Holders Cat 50 | Tool Holder | #4 Morse Taper | $25 EACH | 3 | 007 |
|||||||
4132 | Valenite tool holder, #4 morse taper | Tool Holders Cat 50 | Tool Holder | #4 Morse Taper | $20 EACH | 3 | 004 |
|||||||
4361 | Sandvick Varilock tool holder pieces and parts, assorted sizes. CAT 50 taper, Must buy all or none. | Tool Holders Cat 50 | Varilock | $450 EACH | LOT | 12F |
||||||||
1676 | Sandvik Coromant varilock tool holders #A390.45-50 50 040M and A390.45-50 63 050M | Tool Holders Cat 50 | Varilock | varilock | $35 EACH | 2 | 020 |
|||||||
2946 | Sandvik varilock tool holders #c4-a390.45-50-040 | Tool Holders Cat 50 | Varilock | varilock | $25 Each | 2 | 019 |
|||||||
3945 | MACHINE VISE | Vises | Vise | 8" | $75 EACH | 1 | 12A |